Hunter BELLE MEADE 82023 Installation Manual page 7

0 0 0 0
A17
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
HANG fROM THE WIRING HARNESS.
A19
J
Secure the motor by tightening the 2 screws.
A21
O N
Test the motor. If the motor does not run, check the plug
42950-01 04/18/2007
O F F
connection.
A18
0 0 0 0
I
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched
between the motor and the housing.
A20
Turn on the power source.
A22
Go to step
E1
on page 17
to attach grille.
7