Adjusting The Armrests And The Control Panel; Adapting The Control Panel To The Length Of The User's Arm - Invacare Pronto M41 User Manual

10.1

Adjusting the armrests and the control panel

CAUTION: Danger of the control panel being pushed backwards during an accidental
collision with an obstacle, such as a doorframe or table, and the joystick being jammed
against the armpad if the position of the control panel is adjusted and all screws are not
completely tightened! This will cause the mobility device to drive forward uncontrollably
and potentially injure the mobility device user and any person standing in the way!
• When adjusting the position of the control panel, always make sure to tighten all screws
securely!
• If this should accidentally happen, immediately switch the mobility device electronics OFF at
the control panel!

10.1.1 Adapting the control panel to the length of the user's arm

The photo shows the armrest of the firm seat, other
armrests are similar to this.
• Release wing screw (1).
• Adjust the remote by pushing it forwards or
backwards to the required location.
• Retighten the screw.
42