Table of Contents
Advertisement
BEL DIGITAL AUDIO
I
n
s
t
a
l
l
a
I
n
s
t
a
l
l
a
The BG-8 may be installed in 19 inch bays on an equipment tray or free-mounted on a table
top or other surface using the rubber feet supplied. Ventilation is by natural convection.
Connector I/O
Digital audio inputs use balanced XLR connectors at the rear of the panel.
Configuration
Bargraph meters are supplied in two groups of four to monitor inputs 1 to 4 and inputs 5 to 8.
These two groups of bargraphs may be configured independently to support different meter
ballistics and scales, peak hold decay and different transition points between coloured areas.
Different scales are supported with a range of stick on scale graticules and meter type
settings are made at the rear of the unit using DIL switches.
The BARGRAPH SET, DIL switch adjustments for each group of four bargraphs are as
follows:
AES inputs 1 to 4
•
Use the upper pair of DIL switches S1 to S16
AES inputs 5 to 8
•
Use the lower pair of DIL switches S1 to S16
2006 BEL (Digital Audio) Ltd
BG-8
t
i
o
n
t
i
o
n
The BG-8 balanced digital audio version rear view
3
Installation
Version 0.8
Advertisement
Table of Contents
