USER MANUAL HITACHI Face Shaver BM-530 Thank you very much for purchasing this product. Please read this user manual carefully and use the product properly. This product is for household use only. Please do not use for other purposes.
< 1. Safety Precautions > Cautions: ① The product is designed specially for facial hair and eyebrows. Do not use the product to remove underarm hair or trim hair. ② Users, who have sensitive skin, razor rash, allergies or in areas where there are pimples or acne, should not use the product.
< 2. Names of parts and operation > Make sure to cover Blade the blade after use Switch Push the switch upward to turn ON the product. Removable grip Battery cover Attachment Eyebrow comb Cleaning brush...
< 3. How to insert battery > Cautions: ① Use an alkaline battery only (LR03/AAA). If other type of batteries are used, the product may not be performed well and cause battery life to be shorten. 1. Pull out the battery cover towards the battery cover direction of the arrow and remove it.
< 4. How to use > Cautions: ① Check the blade for any breakage and deformation before use. ② Do not force the blade on skin. ③ Do not use the product to remove underarm hair or trim hair. ④ Do not use the product when make-up, cream, or soap have been applied. *Use on bare skin.
< How to shave facial hair > (Forehead, cheeks, and jaw) Apply the blade to skin gently, and shave hair slowly in the direction against the flow of hair. (Hairline and around nose) Shave hair in the way properly and refer to picture on the right.
< How to use the eyebrow comb > Align the eyebrow comb with eyebrow and trimming. The length of eyebrows is capable of being trimmed are approx. 2mm [short] and approx. 4mm [long] respectively. short (approx.2mm) long (approx.4mm) 1. Turn the switch to OFF, attach the blade to eyebrow comb until it clicks.
< How to exchange and clean blade > Caution: 1. Make sure to turn the switch to OFF when cleaning blade. ・Use shaver cleaner only. ・Do not wash or splash water on the product. ・Clean off dirt of product with cloth wrung out with water. Do not use alcohol, benzin and thinner.
< How to attach blade > 1. If the removable grip is on the lock position, move it towards the direction of the arrow. removable grip 2. Insert the hole in the front edge of blade hole into the projection in the edge of the product. projection <...