Advertisement
< How to attach blade >
1. If the removable grip is on the
lock position, move it towards
the direction of the arrow.
2. Insert the hole in the front edge of blade
into the projection in the edge of the product.
< How to exchange and clean blade >
3. With pressing rear blade gently against
the product, move the removable grip
towards the direction of the arrow. Then,
attach the blade to the product.
4. Put the cap on the blade.
< Trouble shooting >
Please check the following points before contact an authorized dealer.
Symptom
The product doesn't
operate.
・The product doesn't
operate.
・The product doesn't
cut well.
・Weak rotation
・Few of use basis
Check the above points first. If the product doesn't work well, contact an authorized
dealer without repair by yourself.
Check point
Check if battery places
in correct direction.
Check if battery power
is consumed.
The product may not operate if skin oil and dirt
remain on the blade. Keep lubricity of blade by
spraying shaver cleaner.
removable grip
hole
projection
removable grip
cap
Solution
Check the terminal and
insert battery again.
Exchange old battery to
new alkaline battery.
9
Advertisement
