Table of Contents
Advertisement
Using the Resume Function
You can make the computer resume the current application program, using either the SUS/
RES button or the closed cover switch.
Critical Point
Immediately after putting it into the Suspend mode, do not make the computer resume the
program but wait for 10 seconds or so.
Using the SUS/RES button
1
Press the SUS/RES button.
Pressing the SUS/RES button will cause the
indicator
on the status display panel to stop
blinking and light up permanently, and will bring the
computer into operation.
Using the closed cover switch
1
Open the LCD display.
Opening the LCD display will turn on the Cover
Close switch and make the computer resume the
current program.
Critical Point
The Resume function does not operate if Lid Open
Resume in the BIOS Setup dialog box is not selected.
Latch
SUS/RES
button
25
Advertisement
Table of Contents
