Download Print this page

Zodiac Pool Systems Baracuda S3 Owner's Manual

Robotic cleaner

Advertisement

Quick Links

Zodiac Pool Systems, Inc.
2620 Commerce Way
Vista, CA 92081
Tel: 800-822-7933
Fax: 877-327-1403
© 2009 Zodiac Pool Systems, Inc. All rights reserved. TL-3200 W1833A 2/09
www.baracuda.com
Owner's
Manual

Advertisement

loading

Summary of Contents for Zodiac Pool Systems Baracuda S3

  • Page 1 Owner’s Manual Zodiac Pool Systems, Inc. 2620 Commerce Way Vista, CA 92081 Tel: 800-822-7933 Fax: 877-327-1403 © 2009 Zodiac Pool Systems, Inc. All rights reserved. TL-3200 W1833A 2/09 www.baracuda.com...
  • Page 2: Table Of Contents

    - To reduce the risk of electrical shock, do not use S3 Robotic cleaner or power supply RECOMMENDATIONS if the cord is worn or damaged. Contact Zodiac Pool Systems, Inc. immediately for a replacement cord. - NEVER OPEN POWER SUPPLY UNIT.
  • Page 3: S3 Robotic Limited Warranty

    9. In no event shall Zodiac Pool Systems, Inc. be liable in contract or in tort, or under any other legal theory, for lost profits or revenues, loss of use or similar economic loss, or for indirect, special, incidental, consequential or similar damages, even if it has been advised of the possibility...
  • Page 4: Electrical Connection

    ASSEMblY ANd INITIAl USAGE ASSEMblY ANd INITIAl USAGE INITIAL USAGE Failure to heed the following warnings can result wARNING in permanent injury, electrocution or drowning. Select either Perfect or Turbo cleaning cycle on the power supply: PREVENT ELECTRICAL SHOCk The Perfect Cycle • Completed in 3 hours • Keep the power supply at least five (5) feet from the edge of the pool (3m (10ft.) • Cleans walls and floors...
  • Page 5: Care And Maintenance

    Filter Element • Replace the filter element and ensure the elastic fits snugly around the filter frame. Diagram 12. The Zodiac Pool Systems, WEIGHT ADJUSTMENTS Inc. label should be located in the corner, alongside a rod. • Position the plastic retainer clips at the top of the rods. Weight adjustments can improve the cleaning efficiency of your • Replace the filter frame plate and snap it into place.
  • Page 6: Troubleshooting

    SOLUTION: • Ensure the surface of the brushes have not become smooth. We recommend that the brushes are changed every two (2) years, or sooner if they are worn. • Ensure the filter element is not full or clogged. If it is, simply clean it. • Ensure the floating cable is not excessively coiled or twisted. For further troubleshooting information, please contact Zodiac Pool Systems, Inc. at 800-822-7933.

This manual is also suitable for:

Robotic baracuda s3