Panasonic Lumix DMC-G6X Basic Operating Instructions Manual page 37

[Wi-Fi]
[Beep]
[Speaker Volume]
[Monitor Display]/
[Viewfinder]
[Monitor Luminance]
[Economy]
[USB Mode]
[Output]
[VIERA Link]
[3D Playback]
[Menu Resume]
[Menu Background]
[Menu Information]
[Language]
[Version Disp.]
[No.Reset]
[Reset]
[Reset Wi-Fi Settings]
[Pixel Refresh]
[Sensor Cleaning]
[Format]
Configure the each setting for Wi-Fi functions.
Set the volume for electronic noises and the electronic shutter
noise.
Adjust the volume of the speaker to any of 7 levels.
Brightness, colour, or red or blue tint of the Monitor/viewfinder
is adjusted.
Set the monitor brightness to suit the amount of surrounding
light.
Suppresses the unit's power consumption to prevent the
battery from being run down.
Sets the communication method when connecting using the
USB connection cable (supplied).
This sets how the unit connects to a television etc.
Equipment that supports the VIERA Link will connect
automatically.
Set the output method for 3D pictures.
Stores the location of the last-used menu item for each menu.
Set the background colour for the menu screen.
Descriptions of menu items or their settings are displayed on
the menu screen.
Set the language displayed on the screen.
This enables the firmware versions of the camera and lens to
be checked.
Returns the image file number to 0001.
The recording or setup/custom settings are reset to the default.
Reset all settings in the [Wi-Fi] menu to factory default settings.
(excluding [LUMIX CLUB])
It will perform optimisation of imaging device and image
processing.
Dust reduction to blow off the debris and dust that have affixed
to the front of the imaging device is performed.
The card is formatted.
Others
37
(ENG) VQT4Z75