Appendix 2: How To Set Wps - Fly-Link Wireless Network Adapter User Manual

Wireless Network Adapter User Guide

Appendix 2: How to Set WPS

WPS setting supports two modes :PBC and PIN. The detailed
setting steps are as follows:
1.Wireless Connection in PBC Mode
1.1 Enable the router's WPS-PBC feature.
If your router provides WPS button, just press and hold it for
about 1 second, then the WPS LED will be flashing for about 2
minutes, which indicates the router's WPS feature has been
enabled. Otherwise, you can also log on to the router's
web-based utility to enable the PBC mode in WPS settings
screen(For detailed settings,please refer to your router's user
guide).
1.2 Perform PBC connection on the UI of the wireless
adapter
1) On the main interface of Fly-Link's UI, click "Profile"—"Add
WPS Profile".
-49-