Config Ap - Fly-Link Wireless Network Adapter User Manual

Wireless Network Adapter User Guide
In this mode, the client utility differs from that in station mode,
and the main interface is as shown below.
When it is switched to AP mode, the wireless adapter will
automatically set its IP address as 192.168.123.1, and other
clients that connected to this AP will automatically obtain the IP
addresses of: 192.168.123.X(X is any integer from 2 to
254).The function buttons on the top (From L to R )are
respectively Config AP, Advanced, Access Control List,
Associate List, About, Help, and MiniSize, while the left column
displays Turn On/Off RF, Security /No security, and AP mode
icon.

4.2.1 Config AP

This screen is used to set the AP's general parameters including
SSID, wireless mode, channel, authentication type and
encryption type, as shown in the picture below.
-40-