Motorola GP240 User Manual page 34

5. When you stop on a
member of the list, the
display will alternate
between showing the
member's name and
telephone number.
6. Press the select key to enter edit mode.
7. A short press would
enable the editing of the
telephone number. The
display shows the cur-
rent member's telephone
number.
8. A long press would
enable the editing of the
member's name. The
display shows the cur-
rent member's name.
9. Use any of the alphanumeric keys to make the
changes. The blinking cursor indicates the
position of the next number to be added. If you
require a pause in the phone dialing sequence
(to allow for a delay), you can do so by first
pressing the "*" key, followed by pressing the
"#" key. The display will show a "P" for pause.
30
English
10. When you have finished changing the tele-
Alternates between
POLICE DEPT
and
11. You are returned to step
5556213
5556213
12. When you have finished making changes,
13. The radio will return to
Note: The programming-mode annunciator, K,
POLICE DEPT
phone number, press the select key again.
The change is saved in the radio's memory.
5. The display will again
alternate between show-
ing the member's name
and telephone number.
You can now change
additional numbers.
press . to exit program mode.
the home display.
blinks while program mode is active.
• In the edit mode, the , key functions as a
backspace key. Pressing it will erase the previ-
ous digit, and the cursor will move to the left.
When the last digit on the display has been
erased, additional presses of this key or the
/ key will cause you to leave the edit mode
without making any changes.
• You can only enter a maximum of 16 digits in
any entry for the telephone list. When this maxi-
mum is reached, the cursor will disappear. If you
Alternates between
POLICE DEPT
and
5556445
PLANT POLICE