Animation 1 (4-8-3); Animation 2 (4-8-4); Network (5); Automatic (5-1) - Motorola T2688 User Manual

Animation 1 (4-8-3)

Press
leave the keypad untouched for about 20-30 seconds under standby
status, Animation 1 will be displayed on the LCD screen. The display will
be switched to the default mode if there is an incoming call received by
the phone or when you touch any key on the keypad.

Animation 2 (4-8-4)

Press
leave the keypad untouched for about 20-30 seconds under standby
status, Animation 2 will be displayed on the LCD screen. The display will
be switched to the default mode if there is an incoming call received by
the phone or when you touch any key on the keypad.
3
.5 Network
When turning on your mobile phone, the phone automatically selects
the home network for you. You can also do network selection by
manual modes.

Automatic (5-1)

The handset would perform another network search after this function is
selected. Press

Manual (5-2)

The handset would list the available networks when this function is selected.
Use key to select the network to use, then press

Band (5-3)

Your phone can be used under a GSM 900 or GSM 1800 network environment.
You can select which network to connect to under this function item. The band
select option is a network and subscription dependent feature. Not available in
all areas.

900MHz (5-3-1)

Connect your phone to a GSM 900 network system.
After you enter this function by pressing
key to select this mode. If no incoming call is received and you
key to select this mode. If no incoming call is received and you
(5)
key to select.
key, press
36
key to confirm.
key again to