Making A Private Call (Gp580 Radios Only) - Motorola GP540 User Manual

2. The green LED and call received status
,
annunciator, F
will blink indicating that a call is
being received. You have 20 seconds to
answer the call before the radio automatically
returns to the home display.
3. Press the call response button or the call
button.
4. The display shows the
incoming caller's ID
number, and the call
received annunciator will
turn off.
5. After viewing the caller's ID number, you can
decide to either talk privately (go to next step),
or not answer the call by pressing the call
response or call button to return to the home
display.
6. If you decide to answer the call, press the PTT
switch.
7. The caller's ID number
remains displayed for the
duration of the call.
8. When finished with conversation, press .
or the call response button to hang up.
9. The radio will return to
Note: If you press the PTT switch before you press
ID: 722588

Making a Private Call (GP580 radios only)

There are four phases in making a private call, namely
• initiating a private call,
• entering the desired radio ID number,
• sending the radio ID number, and
• having the conversation and hanging-up.
Initiating a Private Call
ID: 722588
1. Press / until CALL is
2. Press l (the softkey below CALL).
the home display.
the call response button, the response will be
transmitted to everyone in the talkgroup (a
dispatch mode operation).
• After answering a Private Call, the caller's ID
number is stored in your radio as the "last ID
number received".
• If your radio is configured for Private Call II,
upon receiving a Private Conversation call, two
alert tones sounds, followed by the received
voice.
displayed.
PLANT POLICE
ZONE MUTE CALL
English
25