Set Lock Code - JVC AV-321802 User Manual

V-Chip
Set Lock Code
Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes preset
with a Lock Code of "0000". You may change the code to any four-digit number you wish. To
change the Lock Code, follow the steps below.
Press the MENU button
AV
To SET LOCK CODE
4)
To operate
The lock icon fi appears
fY!f?
Press ZERO to access the Lock Code
The first digit will be highlighted
4)
To select the number
AV
To move to the next digit
Continue to follow these directions for all four numbers
AV
To FINISH
4) To save settings and exit
Your Lock Code is now set.
NOTES:
l
After a power interruption you must reset the Lock Code.
l
Write your Lock Code number down and keep it hidden from potential viewers.
l
If you forget the Lock Code, a new code may be set using the steps listed above.
33