Setting The Alarms - Easymax R2N User Manual

Setting the Alarms

The meter can set up to 4 alarms, allowing you to control your test times according to your
requirements.
1. Press "" for 5 seconds
and enter the setting mode
of alarm.
2. Press "" to set "On" for
the first alarm.
3. Press "" to adjust time
and press " " to confirm
the setting (24-hour clock).
4. Press "" to confirm
the first setting and then
get into the second one.
38
5. Repeat step 1 to 4 to set
other 3 alarm. If you don't
want to turn on the alarm
at all, turn every alarm
"OFF" at the upper left
corner of the display.
Press "" to confirm the
setting.