Cadillac CTS 2011 Owner's Manual page 246

7-40 Infotainment System
5. Locate the device named Your
Vehicle in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN that was provided in Step 3.
After the PIN is successfully
entered, the system prompts you
to provide a name for the paired
cell phone. This name will be
used to indicate which phones
are paired and connected to the
vehicle. See Listing All Paired
and Connected Phones in this
section for more information.
6. Repeat Steps 1 through 5 to pair
additional phones.
Listing All Paired and Connected
Phones
1. Press and hold
two seconds. For vehicles with a
navigation system say Hands
Free after the tone.
2. Say Bluetooth.
3. Say List.
Deleting a Paired Phone
1. Press and hold
two seconds. For vehicles with a
navigation system say Hands
Free after the tone.
2. Say Bluetooth.
3. Say Delete. The system asks
which phone to delete.
4. Say the name of the phone you
want to delete.
Connecting to a Different Phone
To connect to a different cell phone,
the Bluetooth system looks for the
next available cell phone in the
order in which all the available cell
phones were paired. Depending on
which cell phone you want to
for
connect to, you may have to use
this command several times.
1. Press and hold
two seconds. For vehicles with a
navigation system say Hands
Free after the tone.
2. Say Bluetooth.
3. Say Change phone.
for
Storing and Deleting Phone
Numbers
The system can store up to
30 phone numbers as name tags in
the Hands Free Directory that is
shared between the Bluetooth and
OnStar systems.
for
If another phone is found,
the response will be
<Phone name> is now
connected.
If another phone is not
found, the original phone
remains connected.