Subscribe to Our Youtube Channel
Related Manuals for Energer ENS460DRS
Summary of Contents for Energer ENS460DRS
- Page 1 SAFETY AND OPERATING MANUAL Original Instructions V7.0 3.6V Li-Ion SCREWDRIVER ENS460DRS...
- Page 2 Read all safety warnings and all instructions before use. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 3.6V Li-Ion SCREWDRIVER ENS460DRS...
-
Page 3: General Safety Instructions
Loose clothing, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection equipment, make sure that they are connected and used correctly. Using dust collectors can reduce the dust-related risks. 3.6V Li-Ion SCREWDRIVER ENS460DRS... - Page 4 6)Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 3.6V Li-Ion SCREWDRIVER ENS460DRS...
-
Page 5: Special Safety Instructions
Ensure that the appliance is properly switched off before inserting the battery into the appliance. Inserting a battery into a appliance while it is switched on can cause accidents. 3.6V Li-Ion SCREWDRIVER ENS460DRS... - Page 6 Caution is there is leaking liquid from the battery wear protective clothing, glasses and clothes as this can be acidic. 7. Always disconnect battery charger and remove battery from charger when the charging is complete. 8. Only use the battery charger specifically stated on the base of the battery. 3.6V Li-Ion SCREWDRIVER ENS460DRS...
-
Page 7: Noise Information
Identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). 3.6V Li-Ion SCREWDRIVER ENS460DRS... - Page 8 Intended use The machine is intended for driving in and loosening screws and bolts as well as for tightening and loosening nuts within the respective range of dimension. 3.6V Li-Ion SCREWDRIVER ENS460DRS...
- Page 9 Charging time 3-5 h rivers or immerse in water. 3-5 h Do not dispose of batteries in a fire. They explode and result in injury. yyWxx Manufacturing date code: Year of manufacturing (20yy) and week of manufacturing (Wxx); 3.6V Li-Ion SCREWDRIVER ENS460DRS...
- Page 10 Components and controls Bit holder LED Working light On/off switch Forward/reverse lever Power/Rotation direction Indicator Light green=forward/red=reverse Charger Belt holster 3.6V Li-Ion SCREWDRIVER ENS460DRS...
-
Page 11: Technical Data
Wear ear protection when sound pressure is over 80dB(A) ACCESSOIRES The machine comes with the following accessories : - 9pcs 50mm bits: 4mm, 5mm, 6mm, PH1, PH2, PH3, PZ1, PZ2, PZ3 - 1pc charger - 1pc belt holster 3.6V Li-Ion SCREWDRIVER ENS460DRS... -
Page 12: Charging Procedure
Green Light = charging complete Warning! When battery charge runs out after continuous use or exposure to direct sunlight or heat, allow time for the tool to cool down before re-charging to achieve the full charge. 3.6V Li-Ion SCREWDRIVER ENS460DRS... - Page 13 This machine equipped with two direction indicator light on the top of the tool.(Fig.4) When the machine with forward rotation, the ahead green light will illuminate. When the machine with reverse rotation, the back red light Fig.4 will illuminate. 3.6V Li-Ion SCREWDRIVER ENS460DRS...
-
Page 14: Terms Of Use
In case of problems or for a deep cleaning, consult the manufacturer, its service agent or a similarly qualified person to avoid a hazard. GUARANTEE This ENERGER product carries a guarantee of 12 months. If your product develops a fault within this period, you should, in the first instance contact the retailer where the item was purchased. -
Page 15: Environmental Protection
. Do not dispose of batteries. Return exhausted batteries to your local collection or recycling point. li-ion 3.6V Li-Ion SCREWDRIVER ENS460DRS... - Page 16 EN 60745-2-2 EN 60355-2-29 EN 60335-1 EN 62233 Authorised Signatory and technical file holder Date : 11/09/2012 Signature:_________________ Name / title: Peter Harries / Quality Manager Powersmith (UK) LTD. Trade House , Mead Avenue ,BA22 8RT 3.6V Li-Ion SCREWDRIVER ENS460DRS...
Need help?
Do you have a question about the ENS460DRS and is the answer not in the manual?
Questions and answers