Radio; A/V Function - JGC KTD-61006 User Manual

• Press Fm/am button to select FM or AM radio mode.
• Press or button for about 1.5 seconds to start searching radio stations backward or forward
from the displayed frequency.
• Press or buttons again to stop searching. The radio frequency will be displayed on the
display panel.
Fine tuning
• Press or buttons shortly to fine tune the radio frequency.
Set radio stations
The appliance can store radio stations from 0 to 19, total 20 FM and 20 AM radio stations.
• Press SET button to store a radio station. SAVE 00 will be displayed, 00 represents the default
radio station number.
There are two methods to organize the memorized stations.
• Press or button to choose the memory number.
• Press SET button to store the radio station with the coded radio station number.
• Press SET button repeatedly to store the radio stations with the default radio station number in
sequence.
NOTE: if no buttons are pressed within 3 seconds of pressing the SET button first time, the frequency
will appear on the display panel again, and the station will not be stored.
accessing memorized radio stations
• Press numeral buttons to input the number of the radio station.
• Press ok button for confirmation. Wait a moment without pressing a button and your radio
stations will be selected automatic.
• Press or button to cycle through the radio stations.
• After connecting an external AV source (MP3 player or a multimedia player), press the PowEr
button.
• Press av button to select AV mode.
• Press the lCD/SETUP button to adjust settings.
NOTE: if there is no signal, the LCD screen will show a blue screen. Ensure that the type of the
selected AV signal source is PAL or SECAM.

Client: Rewe
Project: KTD-61006
Language: EN

raDIo

a/v FUnCTIon
Date: 05.03.2007
Version: 02
Page: 73 (of 80 pages)