Latch Child Restraint Fixing System - Mini Cooper Owner's Manual

To lock the safety belt
1. Secure the child restraint system with the
belt.
2. Pull the belt strap all the way out.
3. Allow the belt strap to retract and pull it taut
against the child restraint system.
The safety belt is locked.
To unlock the safety belt
1. Open the belt buckle.
2. Remove the child restraint system.
3. Allow the safety belt strap to retract all the
way.
LATCH child restraint
fixing system
LATCH: Lower Anchors and Tethers for Children.
To install and use the LATCH child restraint
system, follow the operating and safety
instructions provided by the manufacturer of the
system; otherwise, the protective function of the
seat may be compromised.<
Anchor points for LATCH anchors
Before installing the child seat, pull the belt out
of the area for the child restraint fixing system.
The anchor points for the lower LATCH anchors
are located behind the labeled protective caps.
Online Edition for Part no. 01 40 2 607 326 - © 03/11 BMW AG Online Edition for Part no. 01 40 2 607 326 - © 03/11 BMW AG
Transporting children safely
restraint system rests firmly against the seat
backrest; otherwise, the protective function of
the seat may be
Child restraint system with tether strap
anchors could be
By way of example, the illustration shows the
cargo area in the MINI.
There are two additional anchors for child
restraint systems with tether straps, arrows.
When the vehicle is equipped with a flat load
floor
are labeled.
Placement of the tether strap
twisted as it passes to the top anchor. Other-
wise, the strap will not properly secure the child
restraint system in the event of an
Make sure that both lower LATCH anchors
are properly engaged and that the child
compromised.<
Use the tether strap anchors to secure
child restraint systems only; otherwise, the
damaged.<
*
, the anchors are covered. Their positions
Make sure the upper retaining strap does
not run over sharp edges and is not
CONTROLS
accident.<
39