Coolant
Coolant consists of half water and half additive.
Not all commercially available additives are suit-
able for your MINI. Your MINI dealer knows
which additives are suitable and will be glad to
advise you.
Only use suitable additives; otherwise,
engine damage may result. Because addi-
tives are harmful to your health, it is important
to follow the instructions on the
Comply with the appropriate environmen-
tal protection regulations when disposing
of coolant
additives.<
Coolant temperature
If the coolant, and therefore the engine, should
overheat, then a warning light will go on, refer to
page 164.
Checking coolant level
Do not add coolant to the cooling system
when the engine is hot. Escaping coolant
can cause
burns.<
Do not open the hood until the engine has
cooled down.
The coolant level is correct if it is between the
Min and Max markings.
Topping off
1.
Turn the cap of the expansion tank a little
counterclockwise to allow any accumulated
Online Edition for Part no. 01 40 2 607 326 - © 03/11 BMW AG
Online Edition for Part no. 01 40 2 607 326 - © 03/11 BMW AG
Under the hood
2.
3.
Have the reason for the coolant loss eliminated
as soon as possible.
containers.<
pressure to escape, then continue turning to
open.
Slowly fill to the correct fluid level; do not
overfill.
Close by turning the cap.
MOBILITY
139