Transmitter Output Power
The following transmitter parameters can be ad-
justed from the computer by utilizing the Alignment
Software. Refer to the onboard help of the Alignment
Software Manual for details.
Select the high band edge frequency channel
(CH4), and select the "high" power output level.
Key the transmitter and adjust "TX PWR Hi" for a
power output of 70 Watts (± 2.0 W) as indicated
on the wattmeter.
Select the band center frequency channel (CH3),
and select the "high" power output level.
Key the transmitter and adjust "TX PWR Hi" for a
power output of 70 Watts (± 2.0 W) as indicated
on the wattmeter.
Select the low band edge frequency channel
(CH1), and select the "high" power output level.
Key the transmitter and adjust "TX PWR Hi" for a
power output of 70 Watts (± 2.0 W) as indicated
on the wattmeter.
Select the band center frequency channel (CH3),
and select the "low" power output level.
Key the transmitter and adjust "TX PWR L3" for a
power level of 30 Watts (± 1.0 W) as indicated on
the wattmeter.
T1006 T1005 T1011
Alignment
TP1010
TC1001
5-3