Table of Contents
Advertisement
Returnstar Interactive Technology Group Co., Ltd.
h of the upper bracket, two for each of the lower one.)
Step 4. Drill 6 holes(70mm in depth) by a 6mm electric drill on the positions of the 6
screws you determined as per above. (2 holes for each of bottom bracket; 1 hole for
each of upper bracket)
Step 5. Put a Wall Anchor into each hole, and screw the brackets with M4*70 flat
cross-tapping screw.
Step 6. Put IQBoard on the fixed 4 L-type Brackets, and let it centered horizontally.
Fasten the upside screws and lock the downside screws.
3.3 Stand Mounting
Parts list
Picture
Name
Leg Bar
Column
Supporting Bar
Caster
10
Quantity
2
2
2
4
Advertisement
Table of Contents
Need help?
Do you have a question about the IQBoard DVT V7.0 and is the answer not in the manual?