Smart Cruise Control (Scc) System - Hyundai Automobile Owner's Manual

Operation maintenance specifications
Table of Contents

Advertisement

Driving your vehicle
SMART CRUISE CONTROL (SCC) SYSTEM (IF EQUIPPED)
Type I
Type II
CRUISE indicator
SET indicator
Set speed
Vehicle-to-vehicle distance
5
40
E150000ABH
The smart cruise control system allows
you to program the vehicle to maintain a
set speed so long as it is not limited by
traffic. When traffic is encountered the
vehicle will be slowed to maintain a set
distance behind traffic without depress-
ing the accelerator or brake pedal.
WARNING
• If the smart cruise control is left
OBH059051N
on, (CRUISE indicator light in the
instrument cluster illuminated)
the smart cruise control can be
activated unintentionally. Keep
the smart cruise control system
off (CRUISE indicator light OFF)
when the smart cruise control is
not in use, to avoid inadvertently
setting a speed.
• Use the smart cruise control sys-
tem only when traveling on open
highways in good weather.
OBH052051N
• Do not use the smart cruise con-
trol when it may not be safe to
keep the car at a constant speed,
for instance, driving in heavy or
varying traffic, or on slippery
(rainy, icy or snow-covered) or
winding roads or over 6% up-hill
or down-hill roads.
I n f o r ma t i o n P r o v i d e d b y :
(Continued)
• Pay particular attention to the
driving
using the smart cruise control
system.
• Be careful when driving downhill
using the smart cruise control
system, which may increase the
vehicle speed.
• The smart cruise control system
is not a substitute for safe driving
practices but a convenience
function only. It is the responsi-
bility of the driver to always
check the speed and distance to
the vehicle ahead.
✽ ✽ NOTICE
• During normal smart cruise control
operation, when the SET switch is
activated or reactivated after applying
the brakes, the smart cruise control
will energize after approximately 3
seconds. This delay is normal.
• To activate smart cruise control,
depress the brake pedal at least once
after turning the ignition switch to the
ON position or starting the engine. This
is to check if the brake switch which is
important part to cancel smart cruise
(Continued)
control is in normal condition.
conditions
whenever

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2012 genesisGenesis

Table of Contents