Nokia N900 User Manual page 121

Define language and regional settings
1 Select Settings
>
2 Define the device language and regional settings.
3 Save the settings, after which the device restarts.
Display settings
Select Settings and Display.
>
Define the following:
Brightness — Drag the slider right or left to change the
brightness of the display. The display brightness is also
affected by the ambient lighting conditions measured with
the light sensor.
Backlight time-out — Select the period of inactivity, after
which the display is turned off to save power.
Lock screen automatically — Set the device to
automatically lock the touch screen and keys after a defined
period of inactivity.
Display stays lit when charging — Set the display to always
remain on when the device is charging.
Touch screen vibration — Set the display to give a short
vibration feedback when touched.
Power saving mode — Set the device to consume less
power when the display backlight is on.
© 2010 Nokia. All rights reserved.
and Language & region.
Tip: To save the battery and increase the device operation
time, select a low brightness level and a short time-out
period.
Notification light settings
The device notification light can act as a status indicator for
device and application-specific events. You can, for example,
set the notification light to indicate that the device is
switched on when the display is off.
Select Settings and
>
when to use the notification light.
Tip: To save the battery and increase the device operation
time, deactivate the notification light.
Text input settings
Select Settings and
>
Select from the following:
Hardware keyboard layout — Define the character set used
in the physical keyboard. Changing this setting may lead to
the physical keys not matching the hardware keyboard
layout.
Use virtual keyboard — Activate the virtual keyboard.
Word completion — Enable word completion.
Auto-capitalisation — Enable auto-capitalisation, to
capitalise the first letter of sentences automatically when
entering text.
Settings 121
Notification light, and select
Text input.