Connect The Mouse - HP MOUSE User Manual

Mouse
This guide describes how to setup, use, and clean your mouse. For the
optical mouse and the enhanced wheel mouse, using the mouse wheel
and selecting mouse options are also covered. Note that your mouse
runs under Microsoft
(when available), and Windows NT
1.

Connect the Mouse

A. Enhanced Wheel Mouse and Optical Mouse
1. Turn off the computer if you have a mouse that connects to the
PS/2 port. For USB connections, go to step 2.
2. Connect the mouse (or mouse receiver if you have a cordless
mouse) to a PS/2 mouse port or to a USB port. Match the end of
the mouse (or receiver) cable to the port to which it connects.
PS/2 and USB cable connectors are different.
3. Turn on the computer (PS/2 connection), then install the
MouseWare
2.
Install the Software
(
Enhanced Wheel Mouse and Optical Mouse
1. For Windows 2000 and Windows XP (when available) please use
the embedded mouse driver for Enhanced Wheel Mouse and
Optical Mouse.
2. For the Enhanced Wheel Mouse under Win 9x or Win NT4, if a
mouse driver is needed, please use the CD-ROM supplied in the
box.
User's Guide
®
Windows
® software to use all the features of your mouse.
®
9x, Windows
®
.
11
English
®
2000, Windows
®
XP
)