Advertisement
Quick Links
HP Wireless Laser Mouse
User's Manual
Model Name: MORFB1UO
© Copyright 2004 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice
The only warranties for HP products and services are set forth in the
express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
Product Number PP034AA
#ABA
Printed in China
-1-
Advertisement
Related Manuals for HP MORFB1UO
Summary of Contents for HP MORFB1UO
- Page 1 Product Number PP034AA The information contained herein is subject to change without notice #ABA The only warranties for HP products and services are set forth in the Printed in China express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
- Page 2 HP created a “Safety & Comfort Guide” that describes proper workstation setup, posture, and health and work habits for computer users. In addition, it also contains product safety information applicable to all HP products. This guide can be downloaded from the internet at http://www.hp.com/ergo...
-
Page 3: Table Of Contents
Contents Welcome.............................. 4 Installation ............................5 Configuration............................8 Troubleshooting........................... 9 Technical Support ..........................9... -
Page 4: Welcome
Welcome Congratulations on purchasing the HP Wireless Rechargeable Optical Mouse. This guide will provide you with the necessary steps for installing and maintaining your mouse. Package Contents HP Wireless USB Receiver CD with Rechargeable Optical Driver/Software Mouse 1 AA NiMH User’s Manual... -
Page 5: Installation
Installation CAUTION! RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE BATTERY MANUFACTURER’S INSTRUCTIONS. Battery Installation For your convenience, the mouse is pre-installed with 1 AA NiMH rechargeable batteries. To activate the batteries, remove the pull tab located on the bottom of the mouse. - Page 6 Hardware Installation Power on your system. Connect the USB receiver to any available USB port or hub connected to your computer.
- Page 7 User Setup According to standard the mouse is immediately insatzbereit (receivers and mouse are synchronized). Universe you the mouse and receiver to synchronize must, proceed you as follows: ID mode If you are using more than one mouse within 6 feet of the receiver, you must set both mice into ID Mode.
-
Page 8: Configuration
Configuration You can configure all the buttons of this mouse to perform selected functions. To customize your mouse settings: Click Start. Choose Settings, if present. Choose Control Panel. Choose Printers and Other Hardware, if present. Click Mouse When the software is installed, you will see the screen above when viewing your mouse settings. -
Page 9: Troubleshooting
The Universal Serial Bus Controller and USB root hub may not be properly installed on your system. Contact your computer manufacturer for details. Technical Support For technical assistance call 1-866-314-7239 or visit www.microinv.com/hp Technical Support hours of operation: Monday - Friday 8:30am to 10:00pm E.S.T. - Page 10 FCC STATEMENT This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules.
- Page 11 -11-...