Table of Contents
Advertisement
Setting Up the Amplifier with a Handheld Terminal,
Menu Structures and Operations
5 Identification
Submenu1
51 Model No
52 Serial No
53 Time in Service
54 Software ID
55 Terminal SW ID
56 Product Date
57 HW Version
6 TP Module
Submenu1
61 TP SW ID
62 MAC ADDR
63 IP ADDR
64 MASTER RESET
65 FREQ
Note: This menu is only accessible when a transponder is mounted. Same with existing menu in
handheld through LCI interface on transponder.
4038501 Rev C
, continued
Submenu2
–
–
–
–
–
–
–
Submenu2
–
–
–
–
651 STATUS
652 FREQ SCAN
653 BAUDRATE
654 TX FREQ
655 RX FREQ
656 TX LEVEL
657 RX LEVEL
Operation
Continued
Actions
Read-only
Displays product model number
Read-only
Displays product serial number
Read-only
Displays service time, Unit in days
Read-only
Displays amplifier software ID
Read-only
Displays handheld software ID
Read-only
Displays product date of amplifier
Read-only
Displays hardware version of
amplifier
Actions
Read-only (only when using HMS)
Read-only
Read-write (only when using HMS)
Set IP address
Read-write
Select Abort or Reset
Read-only
Read-write (only when using HMS)
Select Disable or Enable
Read-write (only when using SMC)
Select 9600, 19200, 38400 or ERROR
Read-write
5–65 MHz, unit in 0.01 MHz
Read-write
45–174 MHz, unit in 0.01 MHz
Read-write
24–50 dB, unit in 1 dB
Read-only (only when using HMS)
Continued on next page
3-11
Advertisement
Table of Contents
