MDS Orbit MCR-4G Technical Manual page 121

Showing configuration data when the CLI is in operational mode:
admin@(none) 01:24:05> show configuration system name
name "Device#42";
[ok][2012-06-19 01:24:30]
admin@(none) 01:24:30> show configuration system
name
location
clock {
timezone-location America/New_York;
}
geographical-location {
latitude 43.118376;
longitude -77.61152;
altitude 1.0;
}
[ok][2012-06-19 01:24:31]
admin@(none) 01:24:31>
Showing configuration data when the CLI is in configuration mode:
admin@(none) 01:25:36% show system
name
location
clock {
timezone-location America/New_York;
}
geographical-location {
latitude 43.118376;
longitude -77.61152;
altitude 1.0;
}
[ok][2012-06-19 01:25:43]
[edit]
admin@(none) 01:25:43%
Normally, only those values explicitly set by the user will be displayed. Users can selectively view those
nodes that assumed a default value by using the "details" modifier on the CLI, like the example shown on
the next page.
MDS 05-6628A01, Rev. C
"Device#42";
"North_Site"
"Device#42";
"North_Site"
MDS Orbit MCR Technical Manual 113