Installers Instructions To User; Vi. Installer's Instructions To User - Thermo Pride MHA1-50N Installation And Service Manual

All installations and services must be performed by qualified service personnel.
IMPORTANT: Remind homeowner of the importance of monthly filter inspections
during operation to ensure maximum efficiency.
After completing the installation, the installer shall inform and/or demonstrate to
the homeowner:
1. The location of these instructions in the furnace and that these instructions and
the users information manual must be kept along with instructions for any
accessories in the plastic pouch on the inside of the furnace.
2. The location and use of the manual gas shut off valve and furnace electrical
disconnect switch. Instruct user to always shut off gas before shutting off electric
power.
3. The sequence of operation of the furnace.
4. The correct operation and maintenance of the appliance as outlined in the users
information manual.
5. That failure to maintain and operate this furnace in accordance with these
instructions could result in hazardous conditions, bodily injury, and property
damage and may void the limited warranty on the furnace.
6. Review with and encourage the user to read the warnings and instructions
outlined on the front cover and the Safety section of this manual and in the Users
Information Manual.
7. Recommend to the user that a CO detector be installed in the living space with
the use of any fossil fuel burning appliance. The CO Detector should be one that
is design certified by a nationally recognized testing agency.
8. Recommend that the user have a qualified heating contractor inspect the furnace
at the start of each heating season. Inform the user of the frequency of
inspection required for each item in Section IV of the Users Manual.
9. Inform the user to maintain adequate clearances around air openings into the
furnace and not to block or restrict the entrance of air into the furnace area or the
furnace air opening.
VI. Installers Instructions to User
41