Override Operation - Hunter 45030 Setup And Operation Manual

Override Operation

The Override button on the front of the NiteTime Plus™ lets you
temporarily override the existing program and use the attached lamp or
appliance without programming.
Press the Override button once to power the lamp or appliance On
or Off (depending on the current program sequence). To return the
NiteTime Plus™ to its programming, press the Override button one
more time.
In the event the Override button is not manually pressed to return
to programming, the NiteTime Plus™ automatically reverts to
programming during the next time sequence.
The LED under the Override Button comes on when the timer output is
off. The LED goes off when the timer output is on.
43118-01 r100207
17