Radio Overview; Operation And Control Functions; Radio Controls; Programmable Buttons - Motorola GP340 User Manual

RADIO OVERVIEW

This user guide covers the operation of the GP340
Portable Radio.
Please read pages 25 to 27 before using this radio

OPERATION AND CONTROL FUNCTIONS

Radio Controls

The numbers below refer to the illustrations on the
inside front cover.
1. Channel Selector Knob
Allow selection of up to 16 channels.
2. On-Off / Volume Knob
Used to turn the radio on or off, and to adjust
the radioÕs volume.
3. Side Button 1 (programmable)
4. Push to Talk Button (PTT)
Press and hold down this button to talk, release
it to listen.
5. Side Button 2 (programmable)
6. Side Button 3 (programmable)
7. Top Button (programmable)
Recommended for Emergency Button.
8. LED Indicator
Green: Successful power up.
Green Flashing: Radio scanning.
Red: Radio transmitting.
Red Flashing: Channel busy - when receiving.
Yellow: Radio called.
Yellow Flashing: Radio call reminder alert.
Red Flashing: Low battery warning - when
transmitting.
9. Microphone
Speak clearly into the microphone when
sending a message.
10. Antenna
11. Accessory Connector
Connects headsets, remote speaker/micro-
phones and other accessories. Replace
attached dust cap when not in use.

Programmable Buttons

Several of your radio buttons can be
programmed, by the Customer Programming
Software (CPS), to activate the radio features.
The following table shows the features that can
be assigned to the Top button and the three
Side Buttons.
English
3