Audio Output Settings (Audio Out) - Sony RDR-HXD890 Operating Instructions Manual

Audio Output Settings
(Audio Out)
You can switch the method of outputting
audio signals when you connect a
component such as an amplifier (receiver)
with a digital input jack.
b
Note
If you connect a component that does not accept
the selected audio signal, a loud noise (or no
sound) will come from the speakers, and may
affect your ears or cause speaker damage.
Dolby Digital Output (HDD/
DVDs only)
Selects the type of Dolby Digital signal.
Dolby Digital Select this when the
recorder is connected to an
audio component with a
built-in Dolby Digital
decoder.
Dolby Digital Select this when the
-> PCM recorder is connected to an
audio component lacking a
built-in Dolby Digital
decoder.
b
Note
If the HDMI OUT jack is connected to equipment
not compatible with Dolby Digital signals, the
PCM signals will be automatically output even
when you select "Dolby Digital."
DTS Output (DVD VIDEOs only)
Selects whether or not to output DTS
signals.
On Select this when the
recorder is connected to an
audio component with a
built-in DTS decoder.
Off Select this when the
recorder is connected to an
audio component without a
built-in DTS decoder.
b
Note
When HDMI output is performed to equipment not
compatible with DTS signals, the signals will not
be output regardless of the "DTS Output" setting.
96 kHz PCM Output (DVD
VIDEOs only)
Selects the sampling frequency of the audio
signal.
96 kHz ->
The audio signals of DVD
48 kHz VIDEOs are converted to
48 kHz and output.
96 kHz All signals containing
96 kHz are output without
conversion. However, the
signals are output at
48 kHz if copyright-
protected signals are
contained.
b
Notes
• "96 kHz PCM Output" setting has no effect
when audio signals are output from the LINE 2
OUT (R-AUDIO-L) jacks or LINE 3 – TV/LINE
1 jack. If the sampling frequency is 96 kHz,
signals are simply converted to analogue signals
and output.
• If the HDMI OUT jack is connected to
equipment not compatible with 96 kHz signals,
48 kHz PCM will be automatically output even
when you select "96 kHz."
115
,continued