Programming; Setting Day And Time; Programming Setting Day And Time - Hunter QuietFlo 30130 Owner's Manual

Programming

Setting Day and Time

Setting the correct day and time allows the programs to work effectively and provides a
clock for your reference. Although the instructions for setting the day and time are listed
under Initial Operation, they are repeated below for your convenience.
Adjusting Day and Time: (For example, Wednesday at 3:45 pm)
1. To set the day or time, press the DAY/TIME key. All
display features except the day and time will go blank
and the hour will flash.
2. Use the UP/DOWN keys to adjust the hour. Tapping
the key will advance the hour by increments of one.
Holding down the key will change the hour rapidly.
Note the AM/PM indicator as you cycle through a 24
hour period.
3. Press the DAY/TIME key again. Now, the minutes will
be flashing. Use the UP/DOWN keys to adjust the
minute. Tapping the key will change the minute by in-
crements of one and holding the key will change the
minute rapidly.
4. Press the DAY/TIME key to accept the minute setting
and go to the day of the week. Use the UP/DOWN keys
to set the current day.
5. Press the DAY/TIME key a final time to accept the day
setting and return to Normal mode.
41451-01
41451-01_Rev 8-6-04.pmd
12
12
Fig. 19
Fig. 20
Fig. 21
Fig. 22
8/5/04, 5:05 PM