Table of Contents
Advertisement
5) Video Setting
To access the Menu, press MENU then select [Picture]. The Menu
provides options to adjust the video settings. Press UP/DOWN to select an option
and press RIGHT/LEFT to adjust that setting. Press EXIT to exit the menu.
(1). Aspect Ratio
You must set the display format to either 4:3 Full, 4:3 PanScan, 4:3 Letter Box,16:9
Full Screen, 16:9 wide Screen, 16:9 Pillar Box Auto or Auto to get the maximum
display when watching TV .
(2). TV format
If the video does not appear correctly, you need to change the settings.
This should match the most common setting for TVs in your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV .
3) Channel Search
To access the menu, press MENU
and
select [Search Channel]. The enu provides
options to adjust the earch hannel settings.
S
C
Select an option and press RIGHT/LEFT to adjust the setting .
Press EXIT
to exit
the enu.
M
Greece
Off
(1) . Auto Search
Search and install all channels automatically. This option overwrites all preset
channels.
a. Select [Auto Search] and press OK or RIGHT to start channel search.
B. To cancel channel search, press EXIT.
(2). Manual Search
Install new channels manually. This option adds new channels without changing the
current channels list.
A. Select [Manual Search] then press OK or RIGHT. The channel search screen will
appear.
M
s
b. Press the RIGHT/LEFT key to select the channel frequency
c
. Press OK to start searching channels
If a channel is found, it is saved and added to the channels list. If channels can't be
found, then exit the menu.
(3). Country
Select your country of residence.
(4). Antenna power
Enable Antenna Power if an external active antenna is connected.
9
Advertisement
Table of Contents
