Operation - Buffalo DL891-A Instruction Manual

Telephone Helpline: 1300225960

Operation

Connecting the Element/Control Panel
The Element and Control Panel are supplied as a single detachable
part to aid in cleaning the appliance.
To connect to the body of the appliance:
Locate the lugs on the rear of the appliance with the tabs on the
1.
rear of the element/panel unit.
Ensure the safety switch is aligned with the slots on the
2.
appliance [A].
Lower the unit onto the appliance, ensuring the tabs are located
3.
inside the lugs on the rear of the appliance [B].
Cooking
Connect the appliance to the mains power supply.
1.
Set the thermostat to the desired temperature. The amber power indicator light turns On.
2.
Note: 170°C to 180°C is suitable for general cooking.
The appliance begins to heat the oil.
3.
Note: The red Heat indicator light turns On during heat-up. When the oil is at the set
temperatures the light turns Off.
Thermal Cut-out reset cover
Thermal Cut-out reset switch
Power indicator light
Thermostat
Element
Safety switch
[A]
[B]
2