Storing A Number In Memory - Radio Shack 43-3502 Owner's Manual

43-3502.fm Page 14 Wednesday, December 1, 1999 8:54 AM
• When storing numbers for special
services (such as alternate long dis-
tance or bank-by-phone), store the
service's main phone number in one
memory location and numbers for ad-
ditional information in other locations.

Storing a Number in Memory

1. With the TALK/LOW BATT indicator
off, press
MEMORY
MEMORY
Note: If you do not press any button
on the keypad within about 10 sec-
onds, a buzz sounds and the phone
exits the number storing process.
Start again from Step 1.
2. Dial the number you want to store.
3. Press again.
MEMORY
4. Press the memory location number
(0–9) where you want to store the
number. A long beep sounds, and the
phone number is stored in memory.
5. Pull out the memory index card at the
bottom of the base and write the
14
.
stored number next to the memory
location number.
Notes:
• If you receive a call while you are
storing a number in memory, press
to answer the call. Af-
TALK/HANG UP
ter the call, begin again at Step 1.
• To change a number stored in mem-
ory, simply store a new number in that
memory location.
• To clear a memory location so no
number is stored there, press
twice, then press the memory lo-
ORY
cation number. A long beep sounds,
and the number is cleared from mem-
ory.
If a buzz sounds, you did not suc-
cessfully clear the memory location.
Repeat the process.
Memory
Index Card
MEM-