Advertisement
Advertisement
Summary of Contents for QMotion QM 1000AS
- Page 1 User Manual Model: QM 1000AS...
-
Page 2: Table Of Contents
1000A User Manual Contents Warnings Primary controls Specifications Common system configuration set ups Installation and wiring options Related products and accessories Trade secrets... -
Page 3: Warnings
Warnings QM-1000 manual Safety precautions Warning, constant exposure to high ambient Quest Engineering strongly advise unless you possess skill in the proper sound pressure levels will cause hearing damage. use of hand and power tools and Exposure to extremely high noise levels over have a thorough understanding of long periods of time will cause permanent local building and fire codes, then the... -
Page 4: Primary Controls
1000A User Manual Primary controls Description QM 108 Satellite speaker QM1000 Overview The QM108 is a compact 2-way 8-ohm trapezoid full range speaker intended for The compact QM1000/108 Flexi-System is a use with the QM1000 Flexi-System package. combination sub bass and satellite speaker It is also very good as a stand alone timber system powered with three internal amplifiers installation speaker for voice and music... - Page 5 Cable connections and system configuration 1. Stereo – Auxiliary mode switch 2. Left and Right F/male XLR- Phono inputs. Stereo line level signal inputs to sub bass and Input routing selection switch for stereo satellite amplifiers when Aux input switch set sub/satellite or independent multi channel to stereo mode.
- Page 6 1000A User Manual Basic 2 – way mode Independant Satellite mode 1. L&R Line In 3. Aux 1&2 inputs Input to Satellite amplifiers when in Aux mode. Connect signal leads from your mixer (master left/right, line out, to the balanced inputs using XLR mic lead or unbalanced phono connectors.
-
Page 7: Specifications
Specifications QM 1000A Frequency response+/- 3dB 44 Hz - 80-200Hz Axial sensitivity 1W@lm 99dB Maximum SPL @lm 129dB Subwoofer amplifier lx 660 W RMS / Class AB Sat & Mid/High Unit amp 200 W RMS @ 8 ohms / Class AB Connections 2x XLR in, 2x lack MIC IN 2xXLR OUT, 2x Speakon®... -
Page 8: Common System Configuration Set Ups
1000A User Manual Common system configuration set ups 1. Stereo full range sub satellite mode This is the most common configuration for a performer who is using the system as a stereo full range playback for live or pre recorded music. - Page 9 2. Sub + independent stereo The input mode switch mode with alternative This switch configures the QM 1000 mid/high unit for use through the Aux1 & 2 Volume controls. passive speakers Select full-range mode for 12” speakers, 80 Hz for 10”...
-
Page 10: Installation And Wiring Options
1000A User Manual Installation and wiring options Sub bass + powered speaker front-of-house + 2 channels fold-back When the operator wishes to use powered full range speakers, this configuration allows the QM 1000 to provide sub bass enhancement while also allowing 2 channels of separate fold-back. Two fold-back monitor speakers per channel can be connected. - Page 11 Powered Speakers Left and right mixer output to L and R main input Mixer select input mode to AUX Connect XLR line level through output to powered speaker inputs Connect mixer fold-back auxillary outputs to QM1000 AUX input 1 and 2 AUX volume 1 and 2 now control speaker output volume level Connect fold-back speakers to Left...
- Page 12 1000A User Manual Mono satellite speakers Front of house connections + 1 channels fold-back Connect mixer output to Right input Switch input mode to AUX Two 200 watt (8 ohm) satellite amplifiers in the QM 1000 makes it possible to connect the two connect Right XLR line level output front of house speakers to one speaker output to AUX 1 input.
-
Page 13: Related Products And Accessories
Related products and accessories Additional speakers to suit QM 1000A QM 108 QM 10DC QM 12DC Accessories QM15-DWB Dolly Wheel Board QM WSB Mounting Bracket QM15 Transit Cover... -
Page 14: Trade Secrets
1000A User Manual Trade secrets Quest Engineering instant What is Line Level? sound guy course For the purposes of live sound, line level is a signal standard made up by a group of engineers How to avoid distortion in your system many years ago to set a common agreement of how much voltage a preamplifier should output, Whether you are starting with one microphone... - Page 15 How not to turn a mixer into a distortion (B) low frequency hum. This is often caused by generator. noise from the power leads being picked up by the audio signal cables. The preferred solution is To avoid overloading the pre amp inputs, always to connect up your system with “balanced”...
- Page 16 Register Your Product Thank you for choosing Quest. Please take the time to complete your product registration card which is included with the packaging. Registering your Quest Engineering product will: • CONFIRM YOUR WARRANTY • REGISTER YOUR PRODUCT • PROTECT YOUR NEW PRODUCT REGISTER ONLINE: www.questaudio.net/registration www.questaudio.net...