INSTALLATION AND OPERATION MANUAL REV 4.00 November 21, 2003 Northern Airborne Technology Ltd. 1925 Kirschner Road Kelowna BC, Canada V1Y 4N7 Telephone (250) 763-2232 Facsimile (250) 762-3374 Copyright 2003 by Northern Airborne Technology CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
Page 3
Amendment Section(s) Date Entered By Number Date Changed Entered 809-0001 Oct 29,2004 Oct 29,2004 Performed at factory Insert any Amendment Instruction sheets after this page. Nov 21, 2003 Page ii ENG-FORM: 820-0109.DOT CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
Page 5
Update the Amendment Record sheet at the front of the manual. Insert this page into the manual after the Amendment Record sheet (page ii). Manual Amendment ends after the following amended pages Amendment # 1 Oct 29, 2004 Page 1 ENG-FORM: 809-0108.DOT PROPRIETARY AND CONFIDENTIAL TO NORTHERN AIRBORNE TECHNOLOGY LTD.
Input sources can be music, radio feeds (via a pad) or other sources. Note that this connection is the direct input to the AA23 transformer, and is isolated from the headset input only by a simple resistive pad. Signals injected here may appear back at the headset input, and cause problems if isolation was intended.
Shock 12 g. (any axis) Accessories Required but not Supplied Installation kit p/n AA23-IKC (crimp) or AA23-IKS (solder) is required to complete the installation. They consist of the following: AA23-IKC 15 Pin D-min Female Crimp Kit (NAT Part # D15SL-IKC)
In all installations, use shielded cable exactly as shown and ground as indicated. Significant problems may result from not following these guidelines, especially with regard to ground loop noise. Nov 21, 2003 Page 2-1 ENG-FORM: 805-0105.DOT CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
Check for the correct load resistance on pin <7> or < 8>, to a return on pin <15>. Do not power up unit if load resistance shows a short. Do not attach the AA23 until these conditions are met, or damage may result to the unit which is not covered under warranty.
SM23 Rev. 4.00 AA23 Speaker Amplifier Manual Continued Airworthiness Maintenance of the AA23 is ‘on condition’ only. Periodic maintenance of this product is not required. Installation Drawings DRAWING REV. DESCRIPTION TYPE SERIAL # AA23\922-0 1.20 Speaker Amplifier Mechanical Installation Up to 1267 AA23\922-0 1.30...
Need help?
Do you have a question about the AA23 and is the answer not in the manual?
Questions and answers