Advertisement
IMPORTANT INSTALLATION GUIDELINES
Proper Log Placement
Log placement is critical to proper burner performance. Logs
must be correctly positioned onto the burner. The photos in
this manual show the proper pinned position for logs on this
set. Owners need to be shown proper log placement and
instructed not to move the logs.
in the photos. Malformed logs or logs with sloppy pin holes
must be replaced.
Installation and replacement of gas piping, gas utilization
equipment or accessories and repair and servicing of equip-
or company that either in person or through a representa-
tive is engaged in and is responsible for (a) the installation,
testing, or replacement of gas piping or (b) the connection,
installation, testing, repair, or servicing of equipment; that is
experienced in such work; that is familiar with all precautions
required, and that has complied with all the requirements of
the authority having jurisdiction.
The installation must conform with local codes or, in the
absence of local codes, with the National Fuel Gas Code,
ANSI Z223.1.*
*Available from the American National Standards Institute,
Inc. 1430 Broadway, New York, N.Y. 10018.
28563-1-0511
GENERAL INFORMATION
Make Owners Aware of Proper Log Set Operation
Properly installed and properly maintained log sets do not
deposit soot on the logs. If users see soot appear on a log,
call for service. Do not continue to operate the log set.
Glass Doors
Make sure that glass doors are open during all operations
of the logset. The opening of the glass door frame should
be the dimension used for the minimum front opening of the
State of Massachusetts: The installation must be made
of Massachusetts.
Page 3
Hide quick links:
Advertisement
