Download Print this page

Louroe Electronics MS-1 Installation And Operating Instructions Manual

Louroe ms-1 mute switch - installation and operating instructions

Advertisement

Quick Links

6955 VALJEAN AVE, VAN NUYS, CA 91406
PH: (818)994-6498 / FAX: (818)994-6458
techsupport@louroe.com
/ www.louroe.com
DESCRIPTION
The MS-1 Mute Switch is an accessory to Louroe Audio Monitoring/Audio Surveillance Systems when microphone
muting is required. The MS-1 contains a built-in rocker switch mounted to a single gang stainless steel face plate.
When the Top part of the rocker switch is pressed IN, the rocker switch illuminates
live and active. When the Lower part of the switch is pressed IN, illumination of the switch turns OFF, indicating that
power to the microphone is cut off and the microphone is disabled. The MS-1 fits into a single gang backbox (not
included) for mounting to a wall or flat surface.
OPERATION
A rocker switch is mounted to a single gang stainless steel face plate. Top part of switch is marked MICROPHONE ON
WHEN ILLUMINATED. Lower part of switch is marked MICROPHONE OFF.
When the Top part of the rocker switch is pressed to MICROPHONE ON WHEN ILLUMINATED, the rocker switch
illuminates RED, indicating that the microphone is active and will pick up sounds within it's range.
When Lower part of the rocker switch is pressed in to MICROPHONE OFF, illumination turns OFF, indicating that the
microphone is muted and no sound is produced.
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX
®
INSTALLATION AND OPERATING INSTRUCTIONS
WIRING REQUIREMENTS
2 Conductor shielded cable, 22
gauge with a 24 gauge drain wire
NOTE:
West Penn 452 or equivalent
®
website: www.louroe.com
MS-1
MUTE SWITCH
MODEL MS-1
Unshielded cable is not
satisfactory for audio systems
e-mail: sales@louroe.com
Page 1 of 8
RED
, indicating the microphone is
(818)
ms_1_inst_7/11
994-6458

Advertisement

loading

Summary of Contents for Louroe Electronics MS-1

  • Page 1 When the Lower part of the switch is pressed IN, illumination of the switch turns OFF, indicating that power to the microphone is cut off and the microphone is disabled. The MS-1 fits into a single gang backbox (not included) for mounting to a wall or flat surface.
  • Page 2 3 Connect terminal B of the microphone to terminal B of base station or audio interface adapter using wire nut (mentioned previously). ® LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX (818) 994-6458 website: www.louroe.com...
  • Page 3: Wiring Requirements

    Terminal Block of Louroe Base Station Audio Interface Adapter ® LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX (818) 994-6458 website: www.louroe.com e-mail: sales@louroe.com ms_1_inst_7/11...
  • Page 4: Applying Power To The System

    OFF and the microphone is live and microphone is disabled active. ® LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX (818) 994-6458 website: www.louroe.com e-mail: sales@louroe.com...
  • Page 5: Audio Playback

    Single gang electrical box (not included) Weight, net 2.5 oz (71g) ® LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX (818) 994-6458 website: www.louroe.com e-mail: sales@louroe.com ms_1_inst_7/11...
  • Page 6 Speaker (3”) Provides live audio. Muted when a headphone is connected to Headphone Jack [8]. ® LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX (818) 994-6458 website: www.louroe.com e-mail: sales@louroe.com...
  • Page 7 Accepts wiring from the remote Louroe Microphone. A is 12Vdc Power B is Audio C is Ground ® LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX (818) 994-6458 website: www.louroe.com e-mail: sales@louroe.com...
  • Page 8: Important Notice

    LOUROE ELECTRONICS warrants that at the time of shipment products manufactured by LOUROE ELECTRONICS to be free of defects in material and workmanship. Should a defect appear within one year (12 months) from date of shipment, LOUROE ELECTRONICS will, at its sole discretion, repair or replace the defective equipment.