Chapter4. OPERATING THE STANDING AND SITTING FUNCTIONS
1. First, adjust and fix the knee support to suit position
and make sure the two triangular form of knee
support lock to the double-head screws of frame.
(Fig-36&37)
2. Fix and lock in the safety belt.(Fig-38)
3. Fix and strap on the chest belt.(Fig-39)
4. Push forward the joystick of the wheelchair controller to operate the standing up function.
5. Pull backward the joystick of the wheelchair controller to operate the sitting down function.
Note:
● Please make sure your hand is not under the stand up mechanism.
36
38
14
37
39