Tighten Each Of Them. Do Not Overtighten The - NordicTrack INCLINE TRAINER X5I INTERACTIVE User Manual

10. Attach the Console Back (89) to the Console
Cover (87) with two #8 x 1 1/2" Screws (104)
and twelve #8 x 3/4" Screws (1). Start all four-
teen Screws, and then tighten each of them.
Do not overtighten the Screws. Make sure no
wires are pinched.
11. Press the Left and Right Accessory Trays (99,
100) into the Console Cover (87).
Slide the two Handrail Covers (76) down against
the Handrails (88).
12. Make sure that all parts are properly tightened before you use the incline trainer. Keep the included hex
keys in a secure place. One of the hex keys is used to adjust the walking belt (see pages 22 and 23). To pro-
tect the floor or carpet from damage, place a mat under the incline trainer.
10
1
1
1
104
11
76
88
87
11
87
1
1
89
1
104
99
100
76
88