User Safety - New Focus TA-7600 Series User Manual

Semiconductor tapered amplifier
Table of Contents

Advertisement

User Safety

Introduction
Your safe and effective use of this product is of utmost importance to us at Newport. Please read the
following amplifier safety information before attempting to operate the amplifier. There are no
user-serviceable parts inside the optical head or the controller. No attempt should be made to open
either component and doing so voids the factory warranty. Any use of the amplifier system that is not
in compliance with the instructions in this manual may compromise the safety of the user, and the
performance and/or longevity of the device. It is recommended that all safety and operation
procedures are followed carefully.
Usage of Symbols
Several symbols have been used throughout this manual. An explanation of these symbols is given
here.
Symbol
Explanation
Warning. This symbol warns the user of a
potential danger – either electrical or optical.
Caution. This symbol notifies the users that
extra caution should be exercised when
performing procedures discussed in that
section.
This symbol notifies the user of a special
consideration that should be noted.
Laser and Amplifier Safety
The laser radiation emitted from this unit may be harmful. Always follow these precautions:
Avoid direct skin or eye exposure to the beam.
Avoid looking directly at the beam or at radiation scattered from the beam.
Be aware of and follow the warnings on the safety labels (examples are shown on following
pages).
The amplifier will exhibit a five-second delay before emitting light after pressing the on
button, as mandated by the US FDA.
- 3 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents