Hardware Basics - Macally Wireless Bluetooth Keyboard User Manual

Hardware Basics

Low battery indicator - Low keyboard battery level indicator. Please replace batteries.
Bluetooth pairing indicator - LED lights up when pairing button is pressed.
When LED flashes, BTKey is ready to pair with your computer, iPhone, or iPad.
Caps lock indicator - Caps lock mode status LED. When LED is on, Caps lock
mode is on. When LED lights is off, Caps lock mode is off.
Function keys F1 to F18 - Press "Fn" key with one function key simultaneously
Shortcuts (default)
Quit Application (Cmd-Q)
Cut (Cmd-X)
Copy (Cmd-C)
Paste (Cmd-V)
Undo (Cmd-Z)
Redo (Cmd-Shift-Z)
Previous Track (Cmd-Left Arrow)
Play/Pause (Spacebar)
Next Track (Cmd -Right Arrow)
Mute
Volume Down
6
Volume Up
Eject, On-Screen keyboard switch for iPhone/iPad
Zoom Out (Cmd -(minus))
Zoom in (Cmd + (plus))
Print (Cmd-P)
Full desktop screen capture (Cmd-Shift-3)
Rectangular screen area capture (Cmd-Shift-4)
Power button (Ctrl Eject)
Note: iPhone and iPad support these shortcuts only:
Pairing button - press this button until
pairing LED flashes blue to start Bluetooth
pairing with the computer, iPhone, or iPad
Stand - Flip to open the stand to tilt
keyboard angle. (also see drawing below)
Important Note:
1. The keyboard has built-in energy saving feature. It goes into sleep mode when not in use for
a period of time. Press any key (such as "space" key) on your keyboard to wake up again.
2. Please wait for BTKey to be connected before entering your user's password during computer
boot up.
3. Pairing light needs to be on and flashing during pairing process. If it's off, press pairing button
again and start all over to pair BTkey with your device.
Battery compartment -
open the cover to insert 2 AAA
batteries (see drawing on right)
Power on/off switch
7