VIETA VC-HU510BR User Manual page 12

ADJUST SYSTEM MENU SETTING
Press MENU to access into the System Menu. Press
MENU repeatedly to select the item to be adjusted,
then roate Encoder Volume Knob to select a value /
option.
AUTO STORE
Under the Tuner mode, press the POWER/MUTE
button to access into the Auto Store mode. The six
strongest stations of the selected band are saved
in preset channel automatically:FM1,FM2,FM3
(1-6),AM1,AM2.
PTY (Program Type)
Once into the PTY mode, you can be press POWER/
MUTE get into program type item, and rotate Encode
Volume Knob to selected category.
MUSIC
GROUP
POP M,
ROCK M
EASY M,
LIGHT M
CLASSICS,
OTHER M
JAZZ M,
COUNTRY
NATION M,
OLDIES M
FOLK,
A-TEST,
ALARM
AF ON/OFF (Alternate Frequencies)
User can rotate Encoder Volume Knob to turn On
or Off the AF (Alternate Frequencies) function.
When AF in On mode, the unit will be searches for
another station with stronger signal, but with the
same program identification as the current station
automatically.
TIME SET
The time on the clock will be set to 12:00 as the
default. Program the current time by rotating the
volume control clockwise to adjust the minutes and
counter clockwise to adjust the hours.
12
SPEECH
GROUP
NEWS, AFFAIRS,
INFO
SPORT, EDUCATE,
DRAMA
CULTURE, SCIENCE,
VARIED
WEATHER, FINANCE,
CHILDREN
SOCIAL, RELIGION,
PHONE
TRAVEL,
LEISURE,
DOCUMENT
CLOCK FORMAT
User can rotating the Encoder Volume Knob to
selected the clcok format 12H or 24H.
STEREO/MONO
Use this mode to select stereo or monaural reception
for FM radio stations. You can sometimes improve
reception of distant stations by selecting mono
mode.
LOC/DX (Local/Distance Select)
This feature is used to designate the strength of the
signals at which the radio will stop during automatic
tuning. "Distance" is the default, allowing the radio
to stop at a broader range of signals. To set the unit
to select only strong local stations during automatic
tuning, rotate the Encoder Volume Konb until
"LOC"appears in the display.
BEEP ON/OFF (Beep Tone)
The beep tone feature allows the selection of an
audible beep tone to be heard each time a button is
pressed on the face of the radio. "Beep Tone On" is
the default display. Rotate Encoder Volume Konb to
select the "Beep Tone Off" option.
VOL LAST/ADJUST
When ACC On/Off , you can select the below options
to setting Volume memory:
VOL LAST: resume to last Volume level.
VOL ADJUST: turn to setting Volume level.
CD/USB/SD Bluetooth Radio