16) The power/mains plug or amplifier coupler is the disconnect device which must remain readily operable. WARNING To reduce the risk of fire or electric shock, do not expose this amplifier to rain or moisture. VHT 6W Handwired Head • Manual...
Panel Functions (Please refer to Fig. 1 and Fig. for details.) A. THE FRONT PANEL Fig. 1: The Front Panel 1. Power Toggle Switch: Use this switch to turn the amplifier on or off. . High/Low Power and Standby switch: This switch reduces the amplifier’s maximum output power when in Low-Power mode; it preserves the amp’s lively dynamic response when playing at lower volume levels.
Page 6
. Tone: Use this control to adjust the balance of the high and low frequencies. The tone control is functional in both Normal and Boost modes. . Volume: Overall volume adjustment. Turning this knob clockwise (0-10) increases the overall sound level. 6.
Page 7
Footswitch Jack Plug the preamp gain Boost footswitch into this jack. 10. Speak Jacks: Plug a -ohm, 8-ohm,16-ohm cabinet into the appropriate jack. The special 6 Combo’s internal speaker is disconnected when an external jack is used. 11. Power IEc Socket: Use the included power cord with this unit in accordance with the voltage and frequency ratings listed on this manual and...
Limited Warranty Information This amplifier is warranted, to the original Purchaser, to be free from defects in material and workmanship for a period of five () years, excluding the tubes and speaker, which are warranted for ninety (90) days, from the original date of purchase. The manufacturer shall, at its option, either repair or replace the defective product if the product is returned to the original place of purchase.
Need help?
Do you have a question about the SPECIAL 6 and is the answer not in the manual?
Questions and answers