1. Manuals
  2. Brands
  3. Clarity Manuals
  4. Monitor
  5. SN-4610-1080
  6. User manual

Clarity SN-4610-1080 User Manual

46" direct view lcd display
Hide thumbs
Table of Contents

Advertisement

Quick Links

Bay Cat
SN-4610-1080

User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SN-4610-1080 and is the answer not in the manual?

Questions and answers

Related Manuals for Clarity SN-4610-1080

Summary of Contents for Clarity SN-4610-1080

  • Page 1: User Guide

    Bay Cat SN-4610-1080 User Guide...
  • Page 3 SN-4610-1080 Bay Cat 46" Direct View LCD Display User Guide 070-0146-01 4 October 2004...
  • Page 4 Clarity Visual Systems Company makes no warranty of any kind with regard to this material. While every pre- caution has been taken in the preparation of this manual, Clarity Visual Systems shall not be liable for errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, per-...
  • Page 5 In no event will Clarity be liable to buyer or any other party for procurement costs, loss of profits, loss of use, or for any other incidental, consequential, indirect or special damages or for contribution or indemnity claims, however caused.

  • Page 7: Table Of Contents

    Contents 1 About the Bay Cat … 1 1.1 What are the Main Features of Bay Cat? … 2 1.2 You Should Have These Accessories … 4 1.3 Safety for You and Bay Cat … 6 2 Installing … 9 2.1 What You Will Do …...
  • Page 8 3.3.5 Position … 42 3.3.6 Aspect Ratio … 44 3.3.7 Adjusting Color Balance … 46 3.4 Diagnostics, Test Patterns … 48 3.5 Advanced Options … 50 3.5.1 Miscellaneous Options … 52 3.5.2 Backlight Control and Status … 54 3.5.3 Force Analog Mode … 56 3.5.4 Serial Ports Settings …...
  • Page 9 Feedback About Manuals , is constantly striving to provide the best product available at a reasonable cost. Part of this Clarity prod- uct is the manual. If you have found an error in this manual, or if you would like to make any comments about it, you may use this form.

  • Page 11: About The Bay Cat

    1 About the Bay Cat What are the Main Features of Bay Cat? … 2 You Should Have These Accessories … 4 Safety for You and Bay Cat … 6...

  • Page 12: What Are The Main Features Of Bay Cat

    If this happens, use the internal Test Pattern to mounted or mounted on a stand. The display can be display a black screen. Research at Clarity has shown portrait or landscape. that displaying a black image, or turning off the AC power, is the quickest way to dissipate the tempo- rarily retained image.

  • Page 14: You Should Have These Accessories

    1.2 You Should Have These Accessories Standard accessories • 1 DVI to 15-pin D-sub adapter (DVI to VGA) • 1 power cord • 1 VGA cable • 1 remote control • this User Guide • Wall Bracket, with CATLOCK™ and locking tool Optional accessories •...
  • Page 15 Standard accessories Two views of the DVI to 15-pin adapter. DVI male connector VGA female connector Wall Bracket with lock and lock- Remote control ing/unlocking tool Optional accessory Adapter plate after you install the Wall Adapter plate, WAL-4025-00, optional. Bracket on it. Attaches to a wall or to an NEC plasma dis- play bracket.

  • Page 16: Safety For You And Bay Cat

    1.3 Safety for You and Bay Cat This list of safety warning and caution notes isn’t very long. Reading it could save you from getting an electric shock. This display was designed with safety in mind. How- ever, if you don’t heed the safety warning and cau- tions, you could get hurt.

  • Page 19: Installing

    2 Installing What You Will Do … 10 Installing the Bay Cat Wall Bracket … 12 Hanging the Bay Cat on the Wall Bracket … 14 Connecting Power … 16 Connecting Picture Sources … 18 Connecting RS232 Communication … 20...

  • Page 20: What You Will Do

    2.1 What You Will Do The following list is for reference only. See the individual pages (in parentheses) for detailed informa- tion about how to proceed. Installing 1. Installing the Bay Cat Wall Bracket (12) 2. Hanging the Bay Cat on the Wall Bracket (14) 3.

  • Page 22: Installing The Bay Cat Wall Bracket

    2.2 Installing the Bay Cat Wall Bracket The Bay Cat hangs on its wall bracket in either landscape or portrait orientation. All dimensions are in inches. Installing the wall bracket The wall bracket comes with each Bay Cat. The adapter plate is optional. See picture in “You Should Have These Accessories”...
  • Page 23 Diagram of Wall Bracket with Adapter Plate, WAL- the locking mechanism. This Locking Wall 4025-00, an optional accessory. (See “Optional acces- Bracket with CATLOCK™ is a standard accessory. sories” on page 4) • The Locking Wall Bracket does not have the large back plate.

  • Page 24: Hanging The Bay Cat On The Wall Bracket

    2.3 Hanging the Bay Cat on the Wall Bracket The locking system for the Bay Cat wall bracket prevents the display from jumping off the bracket dur- ing earth tremors, and it helps deter theft. Two-person job The Bay Cat weighs just over 71.2 lbs. (32 kg). Always have two persons hang the display on the wall bracket.
  • Page 25 Unlocking from the side: Slide the tool in from the side. It will ride up over the lock and catch it. Pull the lock back to unlock. Unlocking from the bottom: Slide the tool in from the bot- tom, keeping the open side of the hook to the left, as shown. Catch the lock and pull down.

  • Page 26: Connecting Power

    2.4 Connecting Power Bay Cat accepts 115 VAC and 230 VAC with no manual switching. Plug the power cord into the receptacle on the rear of the Bay Cat. Plug the other end into a good source of AC power. When ready, turn on the power switch.

  • Page 28: Connecting Picture Sources

    2.5 Connecting Picture Sources Digital and analog computer pictures share a common connector Computer sources It may be necessary to select Analog or Digital in the Connect computer pictures to the DVI-I connector. EDID menu. This is the standard DVI digital connector, but you can convert it to a 15-pin D-sub for analog computer pictures with the supplied adapter.
  • Page 29 If the Bay Cat is shipped outside the US, the video inputs are disabled. This adapter, supplied in the accessories, converts the DVI input connector to a 15-pin VGA connector.

  • Page 30: Connecting Rs232 Communication

    A complete list of all commands is given in Addressing Bay Cats “RS232 Control for Bay Cat”, document 070-0120, Part of the RS232 command will be an address. available from Clarity’s website: This address may take several forms. www.clarityvisual.com Click on in the top banner.
  • Page 31 Click on the lower, blue button Open or download “Bay Cat RS232 Programming LOGIN NOW Use the name: tech Guide.” Use the password: help Find Bay Cat tech support. The wiring shown for this Yellow wire pin 3 adapter is correct for straight-thru network Black wire pin 2...

  • Page 33: Adjusting And Maintaining Bay Cat

    3 Adjusting and Maintaining Bay Cat Quick Start … 22 Operating the Bay Cat … 24 Manual Selection and Adjustments … 26 3.3.1 Selecting the Picture … 28 3.3.1.1 Auto or Manual Mode Selection … 30 3.3.1.2 EDID: What It Is and How It Works … 32 3.3.2 Adjusting Levels, Computer Sources …...

  • Page 34: Quick Start

    3.1 Quick Start After you select the picture source, most of the rest of setup is automatic, although you can override the automatic settings and adjust anything manually. Selecting the source means choosing the connector If you see no picture … where the picture is coming in.
  • Page 35 If this happens, use the internal Test Pattern to problem. Bay Cat does not experience burn-in, as display a black screen. Research at Clarity has shown plasma displays do. that displaying a black image, or turning off the AC However, Bay Cat’s can experience temporary...

  • Page 36: Operating The Bay Cat

    3.2 Operating the Bay Cat The Bay Cat has a cache which saves the last ten source settings. To change sources (input connectors) corner. You can also disable and enable IR command Press the button on the remote. Bay Cat SOURCE will look for the next connector that has a picture coming in, select that one, and auto adjust to it.

  • Page 38: Manual Selection And Adjustments

    3.3 Manual Selection and Adjustments Manual and semi-automatic adjustments are better for most things. Frequency and Phase are all right when done automatically. The manual adjustments fall into several categories. and indicate where to go for further information on The illustrations below and opposite show the menus them.
  • Page 39 For details, see “Aspect Ratio” on page 44 For details, see “Adjusting Levels, Computer Sources” on page 36 For details, see “Diagnostics, Test Patterns” on page 48 For details, see “Advanced Options” on page 50...

  • Page 40: Selecting The Picture

    3.3 Manual Selection and Adjustments 3.3.1 Selecting the Picture Selecting the source (picture) manually is usually quicker than using the button. SETUP Selecting the picture is really selecting the input con- a) Analog RGB nector. There are three of these connectors: b) Digital RGB •...
  • Page 41 4. Select Phase. Use the right-left buttons to elimi- Video sources nate horizontal streaking. With Composite and S-Video sources you can 5. Exit all menus. adjust Brightness, Contrast, Saturation and Hue. Sat- uration and Hue are best adjusted using a color bar Digital RGB pattern, if one is available from the source.

  • Page 42: Auto Or Manual Mode Selection

    3.3 Manual Selection and Adjustments 3.3.1 Selecting the Picture 3.3.1.1 Auto or Manual Mode Selection Sometimes the automatic mode selection doesn’t get it right. If this happens, you can force the mode manually. This works for Analog RGB sources only. Auto mode selection Manual mode selection •...

  • Page 44: Edid: What It Is And How It Works

    If the resolu- • whether the monitor is analog or digital, tion you want to use is not listed in the Clarity • video timings [resolutions], EDID, and the video card won’t list that resolution •...
  • Page 45 changes the incoming video to the display’s fixed refresh rate. • Be sure you the EDID for DVI/Analog settings is correct. Some video cards with both analog and digital outputs use only one of them, the one cor- responding to what the card read in the EDID. The other output from the card will have nothing.

  • Page 46: Adjusting Levels, Computer Sources

    3.3 Manual Selection and Adjustments 3.3.2 Adjusting Levels, Computer Sources This section applies to Analog RGB (computer) pictures only. The Levels are best adjusted semi-auto- matically. Why adjust levels? the computer that will be used for the program material. Adjusting levels with your laptop, then connecting to For analog RGB pictures the levels for black and the “real”...

  • Page 48: Adjust Levels, Video Sources

    3.3 Manual Selection and Adjustments 3.3.3 Adjust Levels, Video Sources Video sources are adjusted best if a color bar test pattern is available from the video source: the DVD or VCR player. If not, you will have to adjust by eye and the “feel” of the picture. Adjusting with color bars 1.
  • Page 49 Saturation Match Match Match Match Adjust Hue so inside bars match Adjust Saturation so the outside bars when Blue Only is checked. match when Blue Only is checked.

  • Page 50: Adjusting Sharpness

    3.3 Manual Selection and Adjustments 3.3.4 Adjusting Sharpness The Sharpness control has two types of sharpness settings, one for in the Picture menu which adjusts the scaler, and one in the Video Adjustments menu, for video sources only, which is in the video decoder.

  • Page 52: Position

    3.3 Manual Selection and Adjustments 3.3.5 Position This moves the picture image on the screen, but does not move the menus. Position In the Image Pan menu, the four arrow keys move the picture. The Horizontal Position number shows the number of pixels from the beginning of H sync to the first active pixel.

  • Page 54: Aspect Ratio

    3.3 Manual Selection and Adjustments 3.3.6 Aspect Ratio The aspect ratio of any picture is its height divided by its width. H ÷ W = Aspect Ratio The native aspect ratio of the Bay Cat screen is 1.77, which is sometimes referred to as 16:9. This is the HD1920 picture format.
  • Page 55 These are examples of what happens to the picture when the aspect ratio of the source picture does not match the aspect ratio of the display. This will be the case every time the source picture is not HD1920, or some other 1.77 source.

  • Page 56: Adjusting Color Balance

    3.3 Manual Selection and Adjustments 3.3.7 Adjusting Color Balance Color Balance is used to match the colors of adjacent displays when several Bay Cats are arranged in a wall. You may also use it to adjust the color of a single display. For one Bay Cat only 5.
  • Page 57 First press of button MISC Second press of button MISC...

  • Page 58: Diagnostics, Test Patterns

    3.4 Diagnostics, Test Patterns These are used for testing and troubleshooting Possibly the most important test pattern is None. Colors shows a rainbow of colors and a gray scale at This is the one that allows the source picture to show several levels of saturation for testing uniformity.
  • Page 59 None is the only one that does not block the incoming picture. Choose “None” to show the source picture on the screen.

  • Page 60: Advanced Options

    3.5 Advanced Options Menu Options moves the menus to other places on the screen. Auto Adjustment Options sets what will happen automatically and what will not. Menu Options These controls move the menu to a different posi- tion on the screen or rotate it for Portrait orientation. Menu Timeout is set here.
  • Page 61 Auto Adjustment Options • When you press the button on the remote, SETUP each of the checked actions occurs in the order given in the menu. Do Quick Black/White Levels searches for the brightest and darkest pixels in the picture and adjusts to these.

  • Page 62: Miscellaneous Options

    You have a to the frequency and phase of the new signal. choice of several solid colors or the Clarity logo. However, when the new source is close to but not quite exactly like a previous source, the Bay Cat may...

  • Page 64: Backlight Control And Status

    It is done at the factory, In the automatic mode, you let the ambient light not in the field. Contact your Clarity dealer. determine the image brightness. This is useful when the Bay Cat is in a location that sometimes has day- light which, of course, varies.
  • Page 65 When Backlight Control When Backlight Control Mode is Manual, the Mode is Auto, the menu menu looks like this: looks like this:...

  • Page 66: Force Analog Mode

    3.5 Advanced Options 3.5.3 Force Analog Mode Sometimes the automatic mode detection process is unable to detect the mode satisfactorily. In these rare cases you can force the Bay Cat to use a particular mode. Mode forcing applies to Analog RGB pictures only. The menu does not work for digital or video pictures.
  • Page 67 Find the mode and its Mode ID number in the three tables starting on page 94.

  • Page 68: Serial Ports Settings

    3.5 Advanced Options 3.5.4 Serial Ports Settings This applies only if you use RS232 commands to control the Bay Cat. If you wish to control Bay Cats remotely with RS232 Setting the ID commands from a computer, read this section. Other- Each Bay Cat in the RS232 series needs a unique wise, skip it.

  • Page 70: Cleaning The Screen

    3.6 Cleaning the Screen The screen is covered with a protective acrylic sheet. Clean the screen with a soft cloth or lint-free paper towel and a mild cleaning solution. Ordinary window cleaning products, such as Windex™, are safe. CAUTION Prevent liquid from running down the screen and leaking into the interior of the Bay Cat.

  • Page 71: Reference Section

    4 Reference Section Menu Structures … 60 Picture … 60 Input Levels … 61 Video Adjustments … 62 Position … 63 Aspect Ratio … 64 Message In Picture … 65 Diagnostics: Test Patterns … 66 Diagnostics: Hours … 67 Diagnostics: Fans & Values … 68 Advanced Options: Menu Options, Auto Setup …...

  • Page 72: Menu Structures

    4.1 Menu Structures The gray text in menus is for information only. You cannot move the yellow selector to these lines. Some menus change their appearance depending or the source selected or other factors. Picture Source chooses the source (the input connector you want to use) and adjust the picture.

  • Page 73: Input Levels

    Input Levels To set levels semi-automatically, display a black pic- ture from the source computer. Choose Auto Black Level and press . Then display a white picture ENTER from the source, choose Auto White Level and press ENTER The Bobcat is now adjusted to the brightest and dark- est picture this one source can produce.

  • Page 74: Video Adjustments

    Video Adjustments Scaler Sharpness is similar to the Sharpness control for Analog RGD sources. Video Sharpness is a filter applied to the video picture before it gets to the Scaler Sharpness filter. Blue Only is used with source color bars for adjustment. It is visible only when the source is Comp Video or S-Video.

  • Page 75: Position

    Position Image Pan moves the image on the screen. SIZE opens the Picture menu directly.

  • Page 76: Aspect Ratio

    Aspect Ratio The Bobcat’s aspect ratio is 16:9 or 1.77. This menu decides how to handle source pictures that have other aspect ratios. Fill Both Ways — Picture is stretched in one direction to make it fit. This will cause some distortion, unless the source is 1.77. Keep Aspect Ratio / Fill One Way —...

  • Page 77: Message In Picture

    Message In Picture Recall Last MIP displays (turns on) whichever message last appeared. Timeout range is 0 to 60 seconds and is the length of time before the message will disappear. 0 seconds means there is no timeout, and the message will not automatically disappear. Messages are stored in the Bay Cat only through RS232.

  • Page 78: Diagnostics: Test Patterns

    Diagnostics: Test Patterns Move through Test Patterns with the up-down arrow keys.

  • Page 79: Diagnostics: Hours

    Diagnostics: Hours System Time is the total time AC power has been applied. Running Time is the total time the lamps have been on.

  • Page 80: Diagnostics: Fans & Values

    Diagnostics: Fans & Values Fans OK means all the fans are running normally. Last RS232 Packet Type is usually Operation, but could be Key, Event, String or Error. This is the type of packet most recently received by Bobcat. RS232 Packets Received is the number of messages, not bytes, received.

  • Page 81: Advanced Options: Menu Options, Auto Setup

    Advanced Options: H and V Position move the menu on the screen, not the picture. Menu Options, Menu Timeout is in seconds. Menus disappear after this time when there is no remote control activity. Zero seconds means Auto Setup menus do not disappear. Menu Rotation rotates the menu for Portrait orientation.

  • Page 82: Advanced Options: Color Balance

    Advanced Options: Color Balance Color Balance menu is used to adjust the color of the displays in a wall so they all match. See “Adjusting Color Balance” on page 46 for complete details. Color Temperature is used to pre-set the values to 3200K, 5500K, 6500K or 9500K.

  • Page 83: Advanced Options: Misc Options

    Advanced Options: Misc Options Auto Backlight turns on the backlight soon after AC power is restored. Curtain Pattern is displayed when there is no source. Turn Backlight Off saves lamp life and energy. Ignore RS232 CRC will make the Bobcat accept c-type and byte-type commands, regardless without CRC checking.

  • Page 84: Advanced Options: Backlight Control

    Advanced Options: Backlight Control Ambient Light is the light currently in the immediate area of the Bobcat. Backlight Control Mode is either Auto or Manual. Backlight Intensity can be controlled when Backlight Control Mode is Manual. The range is 33 to 100%. In Auto mode, Backlight Intensity is read only.

  • Page 85: Advanced Options: Force Analog Mode

    Advanced Options: Force Analog Mode Select Mode Number lets you choose the mode manually. The Enable Force Mode must be unchecked to start. page 94 Find the appropriate mode from the table on , and dial it into the Select Mode menu. As the mode number changes, its settings are displayed in the line below.

  • Page 86: Advanced Options: Serial Port Settings

    Advanced Options: Serial Port Settings Group ID and Unit ID together make up at two-character ID for this Bay Cat. In a group of Bay Cats connected in a series for RS232 commands, each Bay Cat should have a unique ID. ASCII Response Type is Symbolic (ascii words are returned), Numeric (numbers are returned), or Data Only (only the data value is returned.

  • Page 87: Program Information

    Program Information: When Clarity provides upgraded firmware Bay Cat (software used in the ), it will be available at www.ClarityVisual.com. Click on LOGIN Then click on lower, blue LOGIN NOW User name: tech Password: help...

  • Page 88: Remote Control Buttons

    4.2 Remote Control Buttons Starts searching for the next available source The setup button starts all the auto setup processes that are marked × in the Auto Options menu. Second press of button MISC...
  • Page 89 …when source is composite or S-Video …when source is Analog Turns curtain on and off. When cur- tain is on, source picture is blocked. This button has no function for Turns backlight (lamp) on Bobcat. Turns backlight off Reverts to the previous menu Goes to the selected menu, or performs the selected function Raise and lower values in menus...

  • Page 90: Drawings

    4.3 Drawings Dimensions in inches.
  • Page 91 Bay Cat Side view of , measure to rear of installed bracket.

  • Page 94: Connector Locations And Diagrams

    4.4 Connector Locations and Diagrams 6½" 7" 8" 11¼" 12½" 23½"...
  • Page 95 Wiring for RS232 9-pin to RJ45 adapter The wiring shown for this Yellow wire pin 3 adapter is correct for straight-thru network Black wire pin 2 cables. Green wire pin 5 RJ45 9-pin RJ45 looking into the socket.

  • Page 96: Glossary Of Terms

    Fast key One of the buttons on the remote con- Bay Cat The name for a Clarity direct-view LCD trol that takes you directly to a menu display, similar to a Clarity Bobcat, or chain of menus.
  • Page 97 Term Meaning Term Meaning Lion The name for any Clarity model begin- SECAM The television system used primarily ning WN-6720. in France, Russia and the former Soviet Bloc countries. Sequential Margay Model WN-5040-720, a DLP™ optical Color and Memory. See also NTSC engine with one lamp and a resolu- and PAL.
  • Page 98 A group of displays physically bolted together. (Not possible with Pan- thers.) Wildcat The name for any Clarity model begin- ning WN-4030. WXGA Wide XGA, a standard for distributing analog computer pictures with a res- olution of 1280 pixels by 768 pixels.

  • Page 100: Specifications For Bay Cat

    4.6 Specifications for Bay Cat Mechanical Specification Maximum Minimum Typical Notes Outside dimensions Width 44.0" 1117.6 mm Height 26.1" 662.9 mm Depth 3.9" 99.1 mm Weight 71.2 lbs. 32 kg Shipping weight 100 lbs 45.4 kg Orientation Landscape or portrait Chassis color Standard: dark gray Optional: red, blue, silver, white, beige...
  • Page 101 Optical Specification Maximum Minimum Typical Notes Screen Brightness 450 cd/m ² Contrast ratio 900:1 Viewing Angle, horizontal & vertical ±85° at 10:1 contrast ratio 170° total Color Gamut 72% NTSC Color CIE 0.648 0.333 Green 0.271 Green 0.592 ±0.03 Blue 0.141 Blue 0.066...

  • Page 102: Regulatory Information

    • Consult your dealer or an experienced radio/TV technician. Note: Any changes or modifications to the display not expressly approved by Clarity Visual could void the user's authority to operate this equipment. Use of a shielded interface cable is required to comply with the Class A lim- its of Part 15 of FCC rules.

  • Page 104: Tables Of Modes For Analog Inputs

    4.8 Tables of Modes for Analog Inputs Mode tables are given in horizontal resolution order (below) and mode ID number order (following). Analog Modes in Horizontal Resolution Order Mode Name Mode ID V freq (Hz) H Res V Res Interlace MAC_12c/m DELL_12_85 DELL_12_120...
  • Page 105 Analog Modes in Horizontal Resolution Order Mode Name Mode ID V freq (Hz) H Res V Res Interlace 720x576 DEL_SVGA_48i SVGA_48i VG900601 VG900602 DEL_SVGA_70 G0806072 VS900603 DMT8075 G0806080 DMT8085 SVGA_90 G0806090 G0806100 DEL_SVGA_100 G0806110 DEL_SVGA_120 G0806120 DEL_SVGA_160 DEL_SVGA_200 MAC_16 848x480_60Hz 848x480_60Hz_a 848x480@60VESA 848x480_60Hz_b...

  • Page 106: Tables Of Modes For Analog Inputs

    Analog Modes in Horizontal Resolution Order Mode Name Mode ID V freq (Hz) H Res V Res Interlace 1024 MAC_19 1024 HP_1075A 1024 XGA1076 1024 SUN_1077 1024 G1007080 1024 G1007090 1024 DEL_XGA_100 1024 G1007100 1024 G1007110 1024 DEL_XGA_120 1024 DELL_10_140 1024 1024 1024i...
  • Page 107 Analog Modes in Horizontal Resolution Order Mode Name Mode ID V freq (Hz) H Res V Res Interlace 1280 WXGA72 1280 WXGA75 1280 WXGA75VESA 1280 WXGA85 1280 WXGA85VESA 1280 DMT126A 1280 DMT127A 1280 DMT128A 1280 1024 DMT1243 1280 1024 DELL SXGA_43i 1280 1024 IBM6Km2/km1/HP126...
  • Page 108 Analog Modes in Horizontal Resolution Order Mode Name Mode ID V freq (Hz) H Res V Res Interlace 1920 1200 WUXGA_60 1920 1200 1920x1200@60VESA1 1920 1200 1920x1200ATI 1984 DATEX...
  • Page 109 Analog Modes in Mode ID Order Mode V freq Interlac Mode Name (Hz) Res V Res ATV7229/RS170Yi SVGA_48i ATV7225 DEL_SVGA_48i 1053 VGA_m4ai 1024 VGA_m4 1056 VGA_m4bi 1120 NEC_PC750i 1280 1024 DMT1243 1024 1024 1024i 1360 1024 XGA_m6i 1920 1080 aTV1930/JTV1930_1 1920 1080 aTV1929/JTV1929...
  • Page 110 Analog Modes in Mode ID Order Mode V freq Interlac Mode Name (Hz) Res V Res 848x480_60Hz_a 848x480@60VESA VS901101/VGA_72 DOS_320x240 848x480_60Hz_b XGA6475 VGA_WCE MAC13c/m/lc VGA_m3/640x480 DDT6460/DDT7260 WVGA60 DEL_VGA_120 DEL_VGA_100 720x480 DEL_VGA_90 1984 DATEX 720x576 DMT8075 VG900601 ATV7250E G0806072 VG900602 G0806080 DEL_SVGA_200 SVGA_90 DMT8085...
  • Page 111 Analog Modes in Mode ID Order Mode V freq Interlac Mode Name (Hz) Res V Res 1280 aTV1259/aTV1260 1280 WXGA60VESA2 1280 WXGA70 1280 WXGA60GTF 1280 WXGA60VESA 1024 DMT1075 1280 WXGA70a 1280 WXGA72 1280 WXGA75 1280 WXGA60b 1280 WXGA50b 1024 HP_1075B 1024 G1007080 1024...
  • Page 112 Analog Modes in Mode ID Order Mode V freq Interlac Mode Name (Hz) Res V Res 1152 DELL_864_60 1152 DMT1175 1152 DMT1185 1152 DMT1170 1152 MAC_21 MAC_15 1184 INT_1160 1152 SUN_1166/116B 1152 SUN_1176/117B 1280 DMT127A 1280 DMT126A 1280 DMT128A 1152 CPQ_PS150_11_44i 1280 1024...
  • Page 113 Analog Modes in Mode ID Order Mode V freq Interlac Mode Name (Hz) Res V Res 1664 1248 INT_1660 1600 1200 DELL_UXGA_52...
  • Page 115 CATLOCK manual certifications advanced levels menu checkerboard, making Amb (ambient light) Clarity tech support, getting to ambient light Clarity’s website ambient operating temperature clear input memory ambient threshold color balance amplitude, video input color bars analog...
  • Page 116 ID low intensity H & V sync, definition of main menu...
  • Page 117 PAL, definition of menu pan image advanced levels pan menu aspect ratio Panther, definition of auto adjustment options password for Clarity website color balance patterns, internal test color temperature phase display of, timing phase, adjusting H position manually...
  • Page 118 SXGA, definition of symbolic sync XGA, definition of composite, definition of H & V, definition of Y, definition of loss of YPbPr sync on green, definition of YPbPr, definition of technical support technical support on Clarity’s website temperature, operating temporary image retention...
  • Page 119 LU0243012 If you can’t contact your reseller for some reason, Describe the problem Clarity’s contact information is on the back cover of Try to describe the problem in the most precise lan- this manual. guage you can. Remember, the person you are talking to or writing to can’t see what you see.
  • Page 120 ©2004 Clarity Visual Systems, Inc. All rights reserved 27350 SW 95th Avenue, Suite 3038 Wilsonville, OR 97070-7708 Main Phone: +1 503 570 0700 • Customer Service Phone: +1 503 570 4634 • Fax: +1 503 570 4657 www.ClarityVisual.com • Service@ClarityVisual.com...

This manual is also suitable for:

Sn-4035-wx bobcat

Table of Contents