Sel. 2; Switching Modul A/B - Comm-Tec ProTUNE TXT User Manual

SEL. 2

Pressing the SELECT-key a little bit longer will get you to the second menu level,
where you can change the settings of the individual audio outputs.
⇒ LOUDNESS
BALANCE
⇒ TV
TV
CONTRAST SATURATI
ON
Press the SELECT-key again and you are able to select the respective menu item.
Change parameters by UP and DOWN.
Menu item
BALANCE
LOUDNESS
LINE XLR VOLUME
SPATIAL EFFECT
LCD LIGHT
LCD CONTRAST
TV Contrast
TV Saturation
TV Brightness
TXT Contrast
TXT Saturation
TXT Brightness
TXT BLENDING
OUTPUT RGB (00) /YUV (01)
COLORBAR TEST

Switching Modul A/B

By pressing this key, you are able to switch between Module A and Module B of the
Double Tuner.
Autoprogram Presets
If you want to preset all program places automatically, just push the MUTE and ON
key simultaneously. Keep on pushing the keys until you see the following message
on the display:
A U O P R O G R A M
B O T H 1 |
If you want to preset all TV and FM programs, push key 1 and the Tuner starts the
auto scan process. As soon as a carrier frequency is found, it is stored as program
1, then the auto scan is continued. When the scan of the FM frequency band is
finished, the Tuner continues with the TV frequency band.
If you want to scan for TV or FM programs only, please select key 4 for TV and 7 for
FM. You can stop the scan function by the 0 key.
⇒ LINE XLR ⇒ SPATIAL
VOLUME EFFECT
⇒ TV ⇒ TXT
BRIGHTNESS CONTRAST
P R E S E T S
T V 4 | F M
10 of 26
⇒ LCD ⇒ LCD
LIGHT CONTRAS
T
⇒ ⇒
Value Default
-127 L/R 0
0 -17 6
-114 -12 -18
+/- 99,9% 0%
0 - 3 2
0 - 15 8
0 - 63 32
0 - 63 32
0 - 128 64
0 - 63 32
0 - 63 32
0 - 128 128
0 - 7 3
0 / 1 0
0 / 1 0
?
7 | N O 0
⇒
⇒