How Your Shower Works; Adjusting - ultra finishing AX310 Handbook

Shower
Table of Contents

Advertisement

After Sales Service
We offer a technical advisory service to contractors and other customers with problems in the
field.
RING: 0844 372 7766 or FAX: 0844 372 7767
Spare parts can be supplied against any debit or credit cards.
RING: 0844 372 7750 or FAX: 0844 3737760
Remember to quote the exact type of shower, as written on the front face.
The model and serial number are located on the bottom face of the shower.
Make a note of those numbers, and quote them if you call for advice.
Model No: 53-.............................. / Serial No:..................................
Note: You may be charged for a service call if you do not have a serial number.

How your shower works

Your shower is designed for convenience, economy and safety of use
1. Water is heated instantaneously as it flows over the heating elements in the copper heating
tube. (Diagram 2).
2. The required water temperature is achieved by adjusting the
rate of water flow. Diagram 3 shows the principle involved in
relating temperature rise to flow rate. The higher the water flow
the lower the temperature rise, and vice versa.
The temperature of the water supplied from the mains can vary
considerably throughout the year from 5 to 20°C. This means
that in Winter, the flow rate will be less than in the Summer to
achieve the same outlet temperature. In Summer the
'MEDIUM' power setting may give adequate hot water.
Diagram 2
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ax311

Table of Contents