Switching The Notebook On For The First Time; System) - Fujitsu AMILO Operating Manual

Preparing your notebook for use
Switching the notebook on for the first time (devices
with pre-installed Windows operating system)
Switchingon for thefirsttime
We recommend that the notebook is supplied with power through
the mains adapter during this procedure.
When you switch your notebook on for the first time, the supplied software is
installed and configured. Due to the fact that this installation procedure must not
be interrupted, you should set aside enough time for it to be fully completed and
connect the notebook to the mains outlet using the mains adapter.
During installation, the notebook must only be rebooted when you are requested to do so!
You will be prompted to create a backup copy of the pre-installed operating system. This
backup copy can be used later to restore your notebook to its delivery configuration.
You can find information on how to restore the operating system, drivers, manuals
and special software in the Recovery Process manual.
Your operating system is pre-installed on the hard disk to facilitate the procedure
when you use your notebook for the first time.
► Switch the notebook on (see
► During installation, follow the on-screen instructions.
Consult the operating system manual if anything is unclear about the requested input data.
If a Windows operating system is installed on your notebook, you will find additional
information on the system as well as the drivers, help programs, updates, manuals, etc.
on your notebook, or you can order it via our website (see
10
"Notebook switching on", Page 11).
"Information sources", Page
A26391-K90-Z200-1-7619, edition 1
4).